1. Manuals
  2. Brands
  3. D-Link Manuals
  4. IP Camera
  5. DCS-6220G
  6. User manual

D-Link DCS-6220G User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DCS-6220G

Summary of Contents for D-Link DCS-6220G

  • Page 2: Table Of Contents

    How to PING Your IP Address ..............131 Reset and Restore ..................13 External I/O Port ..................133 Technical Specifications ................137 Contacting Technical Support ................... 139 Time Zone Table ......................140 Warranty ........................14 Registration ......................145 D-Link Systems, Inc.

  • Page 3: Contents Of Package

    DCS-660G User’s Manual Package Contents Package Contents D-Link SECURICAM DCS-6620G 80.11g PTZ Internet Camera  Remote Control  1V AC Power Adapter  A/V Cables   Antennas  Category 5 Ethernet Cable  Camera Stand  Quick Installation Guide ...

  • Page 4: Introduction

    Introduction Introduction The D-Link SECURICAM Network DCS-6620G 80.11g PTZ (Pan, Tilt, and Zoom) Internet Camera is a full featured surveillance system that connects to an Ethernet, Fast Ethernet wireless or broadband Internet connection to provide remote high-quality -Way Full Duplex audio, and 10x optical and 10x digital zoom for greater clarity and detail from your recordings.
  • Page 5 D-Link product provided herein is suitable for the end-user’s intended use under the applicable laws of his or her state. D-Link disclaims any liability whatsoever for any end-user use of the D-Link product, which fails to comply with applicable state, local, or federal laws.

  • Page 6: Connections

    The DCS-6620G 80.11g PTZ Internet Camera has an internal microphone. However, you have the option of using an external microphone by plugging it into the microphone connector. A/V Out Plug the included A/V cable into the A/V out connector to use the DCS-6620G with a television or VCR. D-Link Systems, Inc.

  • Page 7: Bottom Panel

    Located on the bottom panel of the DCS-6620G, the socket is used to connect the camera stand to the 80.11g PTZ Internet Camera by attaching the screw head on the camera stand to the 80.11g PTZ Internet Camera. D-Link Systems, Inc.
  • Page 8 Zooms in to display a specific area. Zooms out to display a larger area. Zoom Out: Auto-Patrol: Enables the Auto-Patrol function. Auto-Pan: Pans the camera one full cycle. Center: Centers the camera lens. Stop: Stops the movement of the camera during pan. D-Link Systems, Inc.

  • Page 9: Hardware Installation

    Internet Camera bottom socket cavity. Attach the camera stand to the Internet Camera and station it for your application. There is a hole located in the base of the camera stand allowing the Internet Camera to be mounted to the ceiling, or any wall securely. D-Link Systems, Inc.

  • Page 10: Installation Wizard

    CD-ROM. The DCS-6620G installation menu will start up automatically from the CD. If the CD does not start up automatically, (this function may be disabled in the Windows operating system), access the CD from Windows My Computer and click on DCS6620G.exe to access the installation menu shown below: Click Installation Wizard D-Link Systems, Inc.
  • Page 11 DCS-660G User’s Manual Installation Wizard Please wait while the InstallShield Wizard prepares to install. Click Next The InstallShield will install in the following folder. To install into a different folder, click Browse and select another folder. Click Next D-Link Systems, Inc.
  • Page 12 Select the Program folder that Setup will add program icons to. You may type a new folder name, or select one from the existing folders list. Click Next Please wait while the Installation Wizard is installed. Installation is now complete. Click Finish. D-Link Systems, Inc.
  • Page 13 (see page 13 for the location of the reset hole). The LED on the front of the camera will begin blinking alternately. When it stops the blinking cycle continue to hold in the reset button for about 10 seconds. D-Link Systems, Inc.
  • Page 14 If a window appears asking to install a Verisign certificate for authentication Click Yes. This allows the proprietary M P E G - 4 v i d e o s t r e a m t o b e recognized by Internet Explorer. D-Link Systems, Inc.

  • Page 15: Installation Wizard Screen

    Remove: Click to remove the selected camera(s) from the network. Uncheck Click to uncheck all selected cameras. All: Links to Click to view all selected devices on your Internet browser. Selected Devices: D-Link Systems, Inc.
  • Page 16 Data Encryption box to enable data encryption and configure the settings. These settings are explained and can also be configured on the Advanced > Network screen (page 38) when configuring the camera via a Web Browser. D-Link Systems, Inc.
  • Page 17 Click the Reset to Default tab to reset the camera’s settings to factory defaults. About Click About to display the current version and date of the Installation Wizard. Exit Click the Exit tab to exit the Installation Wizard screen. D-Link Systems, Inc.

  • Page 18: Enabling Upnp Tm For Windows ® Xp

    UPnP (Universal Plug and Play) settings only if you are running Windows XP. If you are running Windows 000, UPnP is not available. Go to Start > Settings.  Click Control Panel Click Add or Remove Programs D-Link Systems, Inc.
  • Page 19 DCS-660G User’s Manual Enabling UPnP for Windows ® Click Add/Remove Windows Components The following screen will appear: Select Networking Services Click Details Select Universal Plug and Play Click D-Link Systems, Inc.
  • Page 20 Next P l e a s e w a i t w h i l e S e t u p c o n f i g u r e s t h e components. Click Finish D-Link Systems, Inc.
  • Page 21 (in this example, 198.168.0.146). After you click on the DCS-6620G-146 icon, your Internet browser will automatically be opened to the IP Address of the DCS-6620G, in this example it is: http://19.168.0.10. Your DCS-6620G may have a different IP Address. D-Link Systems, Inc.

  • Page 22: Installing Ip Surveillance Software

     AVI file export  Motion detection for each camera  To install the IP surveillance software, click on IP surveillance on the CD included with the 80.11g PTZ Internet Camera. The Welcome screen appears: Click Next D-Link Systems, Inc.
  • Page 23 Click Yes Next, the “User information” window below will appear. This window will prompt you to enter the user name and company name. Enter your user name and company name and then click “Next” to continue. Click Next D-Link Systems, Inc.
  • Page 24 Click “Next” to continue. Click Next Select the installation directory for this application software and click “Next”, which is shown in the figure below. You can change the installation directory by clicking “Browse…” Click Next D-Link Systems, Inc.
  • Page 25 After checking all the setup information in the window shown below, click “Next” to start the installation of the application software. Click Next Click “Finish”, in the window shown below, to finish installation. The program is now installed on your computer. Click Finish D-Link Systems, Inc.

  • Page 26: Testing The Dcs-6620G

    The window in the center of your browser is the camera image window. You should now see a video im- age and hear the audio over your computer speakers from the DCS-6620G. If you are having problems please consult the FAQ section of this manual (page 18). D-Link Systems, Inc.

  • Page 27: Security

    Administrator has access to the management of the 80.11g PTZ Internet Camera. This procedure should be done as soon as possible since the security features of the 80.11g PTZ Internet Camera will not be enabled until the Administrator Password is defined. D-Link Systems, Inc.

  • Page 28: Using And Configuring The Dcs-6620G With A Router

    Using and Configuring the DCS-6620G with a Router D-Link’s DCS-6620G is a versatile and cost effective 80.11g PTZ Internet Camera offering both video and audio monitoring. It can also serve as a powerful surveillance system in security applications. The DCS-6620G can be used with any wired or wireless router. This section explains how to view the camera from either the Internet or from inside your internal network.
  • Page 29 Viewing the Video on the browser to test the connection Click on the Configuration button on the left side of the display. Scroll to the bottom of the Network Configuration page to display the ports used by HTTP and Streaming audio and video. D-Link Systems, Inc.
  • Page 30 Router Set-Up and Installation The following steps generally apply to any router that you have on your network. The D-Link DI-64 is used as an example to clarify the configuration process. Configure the initial settings of the DI-64 by following the steps outlined in the DI-624 Quick Installation Guide.
  • Page 31 DI-64 router. The Virtual Server ports used by the camera must be opened through the router for remote access to your camera. Virtual Server is accessed by clicking on the Advanced tab of the router screen. D-Link Systems, Inc.
  • Page 32 800. Not all routers are the same, so refer to your user manual for specific instructions on how to open ports. Enter valid ports in the Virtual Server section of your router Please make sure to check the box on this line to enable settings D-Link Systems, Inc.

  • Page 33: Viewing Your Camera

    Web server port 80. To access from a computer on your local (home) network, simply enter the local IP Address of the Camera followed by a colon and the port number (e.g., http://192.168.0.120:83). http://05.163.1.96:83 Viewing the DCS-6620G Remotely D-Link Systems, Inc.

  • Page 34: Using The Dcs-6620G With An Internet Browser

     Using the IP surveillance software with the DCS-6620G. Open your Internet Explorer Web browser and enter the IP address for your 80.11g PTZ Internet Camera. In the example, this address is 19.168.0.10. Your address may differ. D-Link Systems, Inc.
  • Page 35 “-” sets the aperture smaller, and “+” sets the aperture bigger. Auto Pan: Pans the camera one full cycle. Stop: Stops movement of the camera during pan or tilt. Auto Patrol: Enables the Auto Patrol feature, please see page 54. D-Link Systems, Inc.
  • Page 36 The image from the DCS-6620G should be visible from the Home page on your computer monitor. There are two buttons on the left side of the Home page: Client Settings and Configuration. Click on the Client Settings button to change settings related to the connection. Click Client Settings D-Link Systems, Inc.
  • Page 37 JPEG images get periodically updated from the server according to the “Frame rate” settings. Talk Button Control Style Allows the User to determine whether to “click once and talk” or “push to talk”. Click the Home tab to return to the DCS-6620G Home page. D-Link Systems, Inc.
  • Page 38 Configuration and Network is the default screen under Advanced. Configuration > Advanced > Network Click Network Any changes made to these settings will require the system to restart . Make sure every field is correct before clicking on Apply. D-Link Systems, Inc.

  • Page 39: General Settings

    Can be set to other than the default port 5002 to correspond with the port opened by the firewall Can be set to other than the default port 5003 to correspond with the UDP Audio channel port: port opened by the firewall. D-Link Systems, Inc.
  • Page 40 Open Authentication – Communicates the key across the network. Select the key length of 64-bits (10 characters in HEX or 5 in ASCII), 18-bits (6 characters in HEX or 13 in ASCII). Select either HEX or ASCII. Key length: Key format: D-Link Systems, Inc.
  • Page 41 Configuration > Advanced > Mail & FTP Click the Mail & FTP button from the Configuration screen to access video settings that control sending images via e-mail or FTP. Click Mail & FTP D-Link Systems, Inc.

  • Page 42: Ftp Settings

    The port to access the external FTP server. 1st FTP server port: Granted user name on the external FTP server. 1st FTP user name: Granted password on the external FTP server. 1st FTP password: D-Link Systems, Inc.
  • Page 43 Consult with your network administrator or your Internet Service Provider (ISP) if you do not have the necessary information. If you cannot connect to the camera, refer to page 13 for camera reset and restore factory settings procedures. D-Link Systems, Inc.
  • Page 44 With the DCS-6620G, you can setup your DDNS service and the DCS-6620G will automatically update your DDNS server every time it receives a different IP address. Depending on the service, this update may take a few hours. D-Link Systems, Inc.
  • Page 45 PTZ Internet Camera. If your operating system is UPnP enabled, the device will be easier to configure. If you do not want to use the UPnP functionality, it can be disabled by unselecting “Enable UPnP”. Click Apply to make changes effective D-Link Systems, Inc.
  • Page 46 It can be either MJPEG or MPEG4. In MJPEG mode, the video frames are independent. In MPEG4 mode, there are I frames and P frames. To decode a P frame need the information of previous frame. MPEG4 consumes much less network bandwidth than MJPEG. D-Link Systems, Inc.
  • Page 47 Horizontally rotate the video. Check options both if the Network Camera Mirror: is installed upside down. Improve efficiancy Check this option to improve efficiency in the multi-user environment in the multi-user when running in the low bandwidth environment. environment: Click Apply to make changes effective D-Link Systems, Inc.
  • Page 48 Simplex- Talk only: In this mode, the User can only talk to the server. Simplex- Listen only: In this mode, the User can only listen from the server. Disable: In this mode, the audio is disabled in both directions. D-Link Systems, Inc.
  • Page 49 You may also try to choose 352x240/352x288 in size option for better images or 704x480/704x576 for larger image size. Because the network has burst constraints and everyone’s environment is not the same, any poor connection will impair normal performance. D-Link Systems, Inc.
  • Page 50 If the image quality is low, select a lower frame rate above 15. If the image quality is still not improved, select a lower bit rate. Configuration > Advanced > Image Setting Click Image Setting Click the Image Setting button from the Configuration screen to access additional settings that affect how the video image appears. D-Link Systems, Inc.
  • Page 51 Checking this box will assist in seeing objects in poor illuminative Low lux mode: environments. Apply when the DCS-6620G is aiming outdoors. Adjusting the 9 Auto tracking white balance: levels of white levels can help the camera to capture video with correct colors. D-Link Systems, Inc.
  • Page 52 Configuration > Advanced > Motion Detection Click the Motion Detection button from the Configuration screen to access settings that effect how the DCS-6620G PTZ Internet Camera can serve as a security device by recording only when motion is detected. Click Motion Detection D-Link Systems, Inc.
  • Page 53 (Note: remember that you can have up to 3 windows selected for motion detection). You can return to the DCS-6620G Home Page and the monitored window will not be visible, but the red frame will show on the home page when motion is detected. D-Link Systems, Inc.
  • Page 54 Select a value between -5 and +5, -5 being the slowest setting. Select the speed at which the camera will pan during auto patrol. Auto Pan/Patrol Speed: Select a value between 1 and 5, 1 being the slowest setting. D-Link Systems, Inc.
  • Page 55 “Enable IR control”, “Dwelling time” and “Patrol selection”. In other words, after changing these settings, and the “Save” button is not clicked, the new setting of the camera will not take effect. Click Apply to make changes effective D-Link Systems, Inc.
  • Page 56 This allows multiple visitors to share the same account of different levels. The options Permission for I/O Control (Digital In/Digital Out) and Permission for PT Control are provided for each account. Some users may need to be prohibited from controlling your attached security devices. D-Link Systems, Inc.
  • Page 57 (once a password has been set). Check this option to shut off the LED at the base of the camera. This Turn off the LED will prevent anyone from observing the operation of the 80.11g PTZ indicator: Internet Camera. D-Link Systems, Inc.
  • Page 58 Assign the IP address or domain name of the timeserver. Leaving the text box blank will let DCS-6620G connect to default time NTP server: servers. Used to adjust the hour of timeservers for local settings. Time zone: Click Apply to make changes effective D-Link Systems, Inc.
  • Page 59 DCS-660G User’s Manual Using the DCS-660G with an Internet Browser Configuration > Tools > Applications Click on the Applications button to access the Applications settings from the Tools menu. D-Link Systems, Inc.

  • Page 60: Weekly Schedule

    An active, named motion window must be checked for motion detection to be possible. Check and save this option to reset the external device at the digital output back to the original state. Reset output: D-Link Systems, Inc.

  • Page 61: Sequential Operation

    JPEG image was captured at 4 minutes and 5 seconds after 3 o’clock, January nd, A.D. 00. If the suffix is omitted, the file named “video.jpg” on the external FTP server will be refreshed at the specified interval. D-Link Systems, Inc.
  • Page 62 DCS-6620G. Click Apply under Calibrate to restore them camera’s factory lens position. This means that the camera will be recalibrated to the default center to position to recover from any external forces that may have affected it. D-Link Systems, Inc.
  • Page 63 Click on the Log button to access a system log of system activity from the Status menu. The content of the log file reveals useful information about the current configuration and connection logged after the DCS-6620G boots up. Click Log D-Link Systems, Inc.
  • Page 64 Configuration > Help Click on the Help tab to access descriptions of the particular function you need help with. The help screen is organized in the order of the tabs and then each menu item under that tab. D-Link Systems, Inc.

  • Page 65: Record Snapshots To Your Ftp Server With Motion Detection

     Adjust the “Sensitivity” and “Percentage” levels according to the local environment. The highest sensitivity and lowest percentage provides the most sensitive setting. Percentage refers to the area that is covered by motion before detection is intialized.  Click on save to enable the activity display. D-Link Systems, Inc.
  • Page 66 Domain name or IP address of your external FTP server such as ftp://dlink.com or ftp://13.13.13.1. (The server name and IP address will vary depending on the user.) The following user settings must be correctly configured for remote access. D-Link Systems, Inc.
  • Page 67 For detailed information about each setting, please refer to Configuration > Advanced > Network in the section titled “Using the DCS-6620G With an Internet Browser” (page 34). Click the apply button when finished. D-Link Systems, Inc.
  • Page 68  Click “Send snapshots by FTP” and check “FTP put snapshots with date and time suffix”  Click the “Apply” button to save the settings. Click the apply button when finished. You are now able to record snapshots to your FTP server when motion detection is triggered. D-Link Systems, Inc.

  • Page 69: Using Ip Surveillance Software

    ATI Radeon series with 18MB Display memory Put the installation disk into your CD-ROM, and it will run automatically. If it does not, open “My Computer” and double click on DCS6620G.exe. The following window will appear. Click IP surveillance D-Link Systems, Inc.
  • Page 70 Using IP surveillance Software Installing the IP surveillance Software (continued) Click Next The “License Agreement” window below will appear. Please read the following license agreement carefully. Click “Yes” to accept this agreement and proceed with the installation. Click Yes D-Link Systems, Inc.
  • Page 71 Enter your user name and company name and then click “Next” to continue. Click Next You must setup the administrator’s password in order to proceed. Input and confirm your password in the window shown in below. Click “Next” to continue. Click Next D-Link Systems, Inc.
  • Page 72 Select the installation directory for this application software and click “Next”, which is shown in the figure below. You can change the installation directory by clicking “Browse…” Click Next Select a program folder to install the application software and then click “Next”, which is shown in the figure below. Click Next D-Link Systems, Inc.
  • Page 73 After checking all the setup information in the window shown below, click “Next” to start the installation of the application software. Click Next Click “Finish”, in the window shown below, to finish installation. The program is now installed on your computer. Click Finish D-Link Systems, Inc.

  • Page 74: Launcher

    After passing authentication, users will be able to use all the functions. If users want to leave the computer, it is possible to lock the Launcher for security reason. When Launcher is locked, the user will need to pass authentication again to see the popup menu. Below is the login window: D-Link Systems, Inc.

  • Page 75: User Interface

    When this item is selected, Launcher will enter lock mode. In lock mode, whenever users want to invoke the menu, a dialog asking for ID and password will appear. The interface for this dialog is covered in the previous section. D-Link Systems, Inc.
  • Page 76  Exit Exits Launcher. If users choose this option, Launcher will show a message box prompting to confirm if users really want to exit, and warn users that exiting Launcher will also close Monitor and Playback. D-Link Systems, Inc.

  • Page 77: Monitor Program

    Multiple recording modes: Event-driven, Scheduled, and manual recording for each  camera. Intelligent database index modes: indexing by sharp time tag, time interval, and motion  detected events. Just-in-time snapshot  AVI export  Motion detection with 3 alert windows for each camera  D-Link Systems, Inc.
  • Page 78 In this area, you can see the video of the selected channel in the display frame. The number of the display frames in the video area depends on the layout chosen by the user. You can also use convenient controls to alter the video display. D-Link Systems, Inc.
  • Page 79 You need to login the first time when you start the Launcher. The authentication window is shown below. If you do not have an account, the monitor tool will not execute. You must log in as admin (administrator) to use this application. Enter the password for the administrator. D-Link Systems, Inc.

  • Page 80: Camera Configurations

    (administrator) privilege in order to run the configuration. Once you click “Configuration Menu > Camera Configurations” for setting each camera, all recording processes will be stopped with a warning window popped up in advance to keep you informed. D-Link Systems, Inc.
  • Page 81 Webpage Camera Selections The Layout of the Configuration In the local settings, shown below, three main functionalities are provided: Insert new History of all camera to the cameras in the list list Delete camera from the list D-Link Systems, Inc.
  • Page 82 Once added, you will see the IP address of the camera and also the port that is opened on the camera (port 80 in this example), so that the images can be viewed from the browser window. The selected camera has been added to the selection list. D-Link Systems, Inc.
  • Page 83 Clicking on one camera in the history list will insert the camera into the camera list. The historical camera list is shown below. Historical camera list Alert and Recording Settings Alert Settings R e c o r d i n g Settings D-Link Systems, Inc.
  • Page 84 Record # secs. after event  Recording will last for the limited time after the alert event has been invoked.  Media Type You can specify which media type you want to record, Video, Audio, or both. D-Link Systems, Inc.
  • Page 85 “SAVE” button in each corresponding page in order to save the settings to the cameras. There are different “SAVE” buttons for changing the settings of the local IP surveillance system and the remote Video Server/802.11g PTZ Internet Camera series product respectively. D-Link Systems, Inc.
  • Page 86 You can activate the global settings window from “Configuration Menu > Global Settings...” shown above. All recording processes will be stopped when activating the global settings window, indicated by a warning window popped up in advance to keep you informed. D-Link Systems, Inc.
  • Page 87 (on a First In First Out (FIFO) basis) when “Cycle Recording” has been checked. Alert Sound  You can load a custom *.wav file for the sound of alert triggering. You can also select from the sound file in Windows. D-Link Systems, Inc.
  • Page 88 Location (channel number + camera name) Remote Time 0 day 00:01 Connection Time (Day:Hour:Min) Recording Time (Day:Hour:Min) D-Link Systems, Inc.
  • Page 89 To delete a location, select the location and click the “Delete” button to the right of the Backup Location Select window. After you have set your backup settings in the global settings window, you can backup recorded data by clicking “Backup” in the Configuration Menu, as seen below: D-Link Systems, Inc.
  • Page 90 Blink  With the motion detection mechanism set in the DCS-6620G, the light of the corresponding channel will blink once the motion event is triggered. D-Link Systems, Inc.
  • Page 91 This section depicts the method of how to show the video of a specific channel in a display window. Step 1: Move the mouse cursor to the display window shown below Mouse cursor Display window Location hint Video 1 D-Link Systems, Inc.
  • Page 92 Dragging and Dropping is a very convenient way to manipulate the video channels in the IP surveillance Software. D-Link Systems, Inc.
  • Page 93 When the cursor shape changes to an arrow-shape over the trashcan, release the left mouse button. The video in the corresponding display window will disappear. All operations above are shown in the figure on the following page. D-Link Systems, Inc.
  • Page 94 You can also exchange the video between different display windows by dragging and dropping. 4 camera layout 6 camera layout 1 camera layout 16 camera layout 9 camera layout 13 camera layout D-Link Systems, Inc.
  • Page 95 When you choose the one-camera layout or four-camera layout, the “Page up” and “Page down” buttons will be shown in the left-bottom corner of the video area. You can use these two buttons to switch the pages, as shown in the figure below. Use to switch between cam- eras. D-Link Systems, Inc.
  • Page 96 The position that each video channel is in for every layout will be saved for the next time the layout is selected. Back to previous Back layout. Input/Output Control Tools Pan/Tilt control Alert Message Digital Input/Digital Output D-Link Systems, Inc.
  • Page 97 DI and also trigger the camera by DO switch Set digital output to LOW Set digital output to HIGH No connection When the color of a DI/DO number is gray, that means the video has not yet been connected to a camera. D-Link Systems, Inc.
  • Page 98 0:41:00 PM in Motion Window  and Motion Window 3, for camera #1. If the message “PM 0:41:56=>DI #1” is listed, that means there is an alert triggered by the DI, for camera #1, at 0:41:56 PM . D-Link Systems, Inc.
  • Page 99 Minimize This section will describe some other miscellaneous functions of the icons shown above. These functions are: Quit By clicking this button, IP surveillance will be closed with the latest settings saved. Minimize Minimize the Monitor application. D-Link Systems, Inc.
  • Page 100 This section will describe the common control functions, shown above, which are depicted by the small icons. These functions only apply to the currently selected channel. These functions are: Volume Control Click on this button to adjust your volume settings. D-Link Systems, Inc.
  • Page 101 Click on the printer icon to print the current image to your default printer. Trashcan You can drag and drop the video channel to the Trashcan to close the video connection with the DCS-6620G. Status Bar Local time Software name Current login user Software version Login time D-Link Systems, Inc.

  • Page 102: Scheduling

    Individual schedule for each video channel  Supports up to 9 preset schedule schemes for each video channel  Automatic period recording Invoke Scheduler This section discusses the method of how to invoke the scheduler. Start the Scheduler Schedule Tool D-Link Systems, Inc.
  • Page 103 “Scheduler” to launch the scheduler. The Layout and Functionalities Introduction The layout of the scheduler and its components, shown below, will be described. Part 1 Part  Part 3 Part 4 D-Link Systems, Inc.
  • Page 104 The scheduler can be closed from here. The Functionalities of Configuration Components The four main parts of the scheduler have been briefly described in the section above. Parts 1-4 will be described in detail in the following section IP address Location Video channel D-Link Systems, Inc.
  • Page 105 The corresponding changes for the markers on the week time-line will be automatically added to the hour time-lines, which is shown above. You can also mark and unmark the plotted bar by clicking and dragging with the left and the right mouse button. D-Link Systems, Inc.
  • Page 106 The second and third units are the hour picker and the minute picker. You can change the hour and minute settings for the beginning and ending time with them. Note: The time set in “Begin time” must be earlier than that in “End time”. Otherwise the settings will not be applied. D-Link Systems, Inc.
  • Page 107 The motion windows are labeled in the order in which they are added when configuring motion detection for the camera. For example, Window1 is the first window added, regardless of if the name of the window has been changed. D-Link Systems, Inc.
  • Page 108 If you select Continuous mode in the schedule mode selector, it will record continuously during the schedule that is set up by the user. Secondary Schedule Secondary schedule is for recording outside of the primary schedule. The secondary schedule provides options to record without a specified date or time. Schedule modes D-Link Systems, Inc.
  • Page 109 This button is used to save the current schedule as another file name instead of the default name.  Undo Click on this button to undo all changes for the current schedule since the last save. Close  Click on this button to close the scheduler. D-Link Systems, Inc.

  • Page 110: Playback Program

    User input (from full range to 1 second)  Zoom in (from full range to 10 seconds)  Zoom out (up to full range)  Full range  System control tool: Window locker  System settings  D-Link Systems, Inc.
  • Page 111 For security concerns, only the admin account can log in to this program. To change the password of the admin account, please refer to the section titled “Logging In.” Layout Area Selection Indicator Control Area Display Area Pull Bar Area Status Area Histogram Area D-Link Systems, Inc.
  • Page 112 Under the normal display mode as shown in the figure below, you can just double click on the frame area to change the frame size to 1:1 or .5:1. Playback method Display adjustment tool D-Link Systems, Inc.
  • Page 113 If you select the histogram area, the display adjustment tool will disappear and the searching range adjustment tool will be shown in the same place of the control area. D-Link Systems, Inc.
  • Page 114 After the main window is shown on the screen, you must modify the settings to make it to work properly. Click on the “Settings” button, shown below, in the system control tool, and the setting dialog will appear on the screen. Exit Lock Windows Settings Minimize D-Link Systems, Inc.
  • Page 115 If you select the wrong mode, the video shown in the display area will become distorted. If you have chosen the wrong modulation mode, you may open the settings dialog again, change to the correct mode, and restart the playback program. The display will now be normal. D-Link Systems, Inc.
  • Page 116 Under the normal display (single frame) mode, you can use all the tools provided with the playback program, except the page control. In this mode, the two labels under the pull bar show the starting and the ending time of the interval individually (as shown above). D-Link Systems, Inc.
  • Page 117 Selector Tools The figure below shows the selector tools. They are location selector, period selector for the selection of the beginning time and the ending time, playback method selector, and alert area selector. D-Link Systems, Inc.
  • Page 118 Besides, the pull bar and histogram area will change, too. If the selected period is not present in the database, the data in the period selector will change to the previous correct start and end time, and a warning message will be displayed. D-Link Systems, Inc.
  • Page 119 For the play control, the jog dial, shown in the figure below, is used to provide the easiest method of controlling the video sequence display. All buttons can control the displaying frame in the normal display mode. D-Link Systems, Inc.
  • Page 120 To increase playing speed, move the indicator in the clockwise direction. And to decrease playing speed, move it in the counterclockwise direction. The current speed that is set will be shown in the second column of status area. D-Link Systems, Inc.
  • Page 121 When you click on the “Zoom Out” button one time, the image size in the display area will be minified 1.5 percent to the original size. To show the location and time information completely, the minimum zoom out ratio is limited in 0.5:1. D-Link Systems, Inc.
  • Page 122 You can see the new interval in more details. The scale of pull bar and alert histogram window change. The period start and end time change as well. The period selector will show the new start and end time. The display area will restart and display the new period from the newly defined start time. D-Link Systems, Inc.
  • Page 123 “Lock Window” button to lock the main window. Once you click this button, the main window will be hidden and the login dialog will appear. To return to the main window, you need to re-enter the admin’s password again. D-Link Systems, Inc.
  • Page 124 The settings dialog will pop up when you click the “Settings” button. For more information about setting this program, please refer to the section titled “Settings.” Minimize Click this button in order to minimize the playback program window. Exit The playback program will be closed immediately when you click on the “Exit” button. D-Link Systems, Inc.

  • Page 125: Schedule Video Recording With Motion Detection

    For detailed information about each setting, please refer to Configuration > Advanced > Motion Detection in the section titled “Using the DCS-6620G With an Internet Browser” (page 5). Next, run the IP surveillance program. Click on the Configurations button and select Scheduler. D-Link Systems, Inc.
  • Page 126 You do not need to set the Secondary Schedule with the Primary Schedule. To schedule video recording with motion detection, you can use either the Primary Schedule or Secondary Schedule, or both. D-Link Systems, Inc.
  • Page 127 If you would like to save this configuration, click Save As to save this configuration to a folder in your hard drive. This configuration can be used on another system running IP surveillance or can be used as a backup if you need to re-install the IP surveillance software program. D-Link Systems, Inc.

  • Page 128: Frequently Asked Questions

    Q: When physically connecting the 802.11g PTZ Internet Camera to a network what network cabling is required? A: The 80.11g PTZ Internet Camera uses Category 5 UTP cable allowing 10 Base-T and 100 Base-T networking. D-Link Systems, Inc.
  • Page 129 Q: Can the 802.11g PTZ Internet Camera be setup as a PC-cam on a computer? A: No, the 80.11g PTZ Internet Camera is used only on an Ethernet or Fast Ethernet network. The D-Link DSB-C110, DSB-C310, can be used as a PC Camera (Webcam).
  • Page 130 Advanced > Image Setting section of the Web management you need to adjust the image related parameters such as brightness, contrast, hue and power line frequency for fluorescent light . Please refer to the Advanced > Image Setting section on page 50 and 51 for detailed information. D-Link Systems, Inc.

  • Page 131: How To Ping Your Ip Address

    80.11g PTZ Internet Camera from the network. Start a DOS window. Type ping x.x.x.x, where x.x.x.x is the IP address of the 80.11g PTZ Internet Camera. The replies, as illustrated below, will help diagnose any connection problems. D-Link Systems, Inc.

  • Page 132: Reset And Restore

    Withdraw the tool after the second cycle of the LED blinking and a factory restore has been completed. Reset button Restoring the factory defaults will result in the loss of any previous settings and will require running the Installation Wizard to return the DCS-6620G to a normal state. D-Link Systems, Inc.

  • Page 133: External I/O Port

    INPUT (Max. 50mA, 1VDC)  DI- INPUT (Initial state of DI is low) 3 SW_COMMON OUTPUT (open from SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) 4 SW_NOPEN OUTPUT (Max. 1A, 4VDC or 0.5A, 15VAC) D-Link Systems, Inc.
  • Page 134 Configuring Your Camera for External Trigger Based Recording To configure your camera to record when triggered by an external device, you must first set your SMTP or FTP settings in order to send snapshots to your e-mail account or FTP server. D-Link Systems, Inc.
  • Page 135 In this window, enter the settings for the SMTP or FTP server to which recorded snapshots will be sent. For detailed information about each setting, please refer to Configuration > Advanced > Mail & FTP in the section titled “Using the DCS-6620G With an Internet Browser” (page 34). Click the apply button when finished. D-Link Systems, Inc.
  • Page 136  Select to either send snapshots by e-mail or by FTP. Click the apply button when finished. You are now able to send snapshots, based on triggered recording, to your e-mail account or FTP server. D-Link Systems, Inc.

  • Page 137: Technical Specifications

    Up to 30 fps at 35x40 Up to 10 fps at 704x480 General I/O 1 opto-isolated sensor input (max. 1VDC 50mA) 1 relay output (max. 4VDC 1A, 15VAC 0.5A) Security Administrator and user group protected Password authentication D-Link Systems, Inc.
  • Page 138 4.0in.L) x 4.1in.(W) x 5.3in.(H) Viewing system requirement Protocol ActiveX Operating system Microsoft Windows XP or 000 ® Browser Internet Explorer 6.x or above Environmental Operating F to 113 Storage F to 158 Humidity Max 95% RH Safety FCC class B D-Link Systems, Inc.

  • Page 139: Contacting Technical Support

    Contacting Technical Support Contacting Technical Support Technical Support You can find software updates and user documentation on the D-Link website. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone. Tech Support for customers within the United States:...

  • Page 140: Time Zone Table

    DCS-660G User’s Manual Time Zone Table Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from. D-Link Systems, Inc.
  • Page 141 DCS-660G User’s Manual Time Zone Table D-Link Systems, Inc.

  • Page 142: Warranty

    DCS-660G User’s Manual Warranty Warranty D-Link Systems, Inc.
  • Page 143 DCS-660G User’s Manual Warranty D-Link Systems, Inc.
  • Page 144 DCS-660G User’s Manual Warranty D-Link Systems, Inc.

  • Page 145: Registration

    DCS-660G User’s Manual Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1. 11/30/007 D-Link Systems, Inc.

Table of Contents