D-Link DCS-6220G User Manual page 66

DCS-660G User's Manual
Next, click the Mail & FTP button under the Advanced tab to set the FTP server settings for the DCS-
6620G.
In this window, enter the settings for the FTP server you wish to record to. Optionally, you can enter
settings for a secondary backup FTP server.
Local FTP server port:
1
2
D-Link Systems, Inc.
Record Snapshots to your FTP server with Motion Detection
Click Mail & FTP
The Default port is 1. To connect to an FTP server, it is recommended
that you do not change the port number unless your camera is behind
a router. If your camera is behind a router, you can assign any port
number to this field, but you must enable port forwarding on the
router. Please refer to your router manual for more information on
port forwarding.
1st FTP server: If you are going to upload snapshots to an FTP server, you will need
to fill in the Domain name or IP address of your external FTP server
such as ftp://dlink.com or ftp://13.13.13.1. (The server name
and IP address will vary depending on the user.) The following user
settings must be correctly configured for remote access.
1
13.13.13.1
John Smith
4
Snapshot
6
2
3
5
66