D-Link DCS-6220G User Manual page 16

DCS-660G User's Manual
Setup
On the initial Setup Screen you can configure System
and Date/Time settings for each camera. Click Next to
configure Network settings for the camera.
System
Settings:
Date/Time
Settings:
Network
Settings:
Wireless
Network
Settings:
D-Link Systems, Inc.
Enter a Camera Name and create an
Admin password for the camera.
Enter the Date and Time for each camera.
These settings can also be configured
on the Tools > System screen (page 57)
when configuring the camera via a Web
browser.
Here users can configure the Network
Settings for the camera. Enter the IP
address, Subnet mask, Default router
IP, Primary DNS, and Secondary DNS.
Automatically, the option to reset IP
address at boot is selected. If you would
like to save your IP address settings,
make sure to uncheck this box.
Here users can configure the Wireless
Network Settings for the camera. Enter
the SSID and select the Wireless mode,
Channel, Tx Rate, and Preamble. Check
the Data Encryption box to enable data
encryption and configure the settings.
These settings are explained and can also
be configured on the Advanced > Network
screen (page 38) when configuring the
camera via a Web Browser.
Installation Wizard Screen
16