Installation Wizard Screen - D-Link DCS-6620 User Manual

DCS-6620 User's Manual
After you click "Yes" to the Verisign
certificate for authentication,
you should see an image from
your DCS-6620 PTZ Internet
Camera.
You have now completed the Setup Wizard and are ready to use your camera! You can also continue
to the section titled "Installing IP surveillance Software" (page 22) to install the IP surveillance
software before you begin to use the DCS-6620.

Installation Wizard Screen

The following options are available on the Installation Wizard screen by clicking on the
corresponding tab:
Search: Click to search for any available
Add: Click to manually add a camera
Remove: Click to remove the selected
Uncheck
All:
Links to
Selected
Devices:
D-Link Systems, Inc.
cameras to connect to the network.
to the network. A window will
appear, prompting you to enter the
camera's IP address or domain
name. A second window will appear,
prompting you to enter the port
number.
camera(s) from the network.
Click to uncheck all selected cameras.
Click to view all of the selected cameras. For each individual camera selected,
an individual Internet browser will appear.
Installation Wizard Screen
15