Av (Composite Video) (Good) - Insignia NS-55D420NA16 User Manual

AV (composite video) (good)

Notes
On your TV
AV Audio cable
(composite connectors
video)
cable
connector
AV Analog
(composite audio jacks
video) jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the green VIDEO/Y jack and L and R AUDIO jacks on the back of your TV and
to the AV (composite video) and audio out jacks on the cable or satellite box.
Important
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight Component/AV, then press ENTER.
16
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
VIDEO/Y jack.
• The VIDEO/Y, P , and P
B
device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to
connect an AV. You can only connect one component video or AV device
at a time. We suggest upgrading to HDMI if your cable or satellite box
supports it.
• When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
www.insigniaproducts.com
satellite box
AV cable
Back of TV
video jacks (used to connect a component
R
Insignia 55" 1080p 60Hz LED TV
Cable or
Cable wall
jack