Connecting A Dvd Or Blu-Ray Player; Using Hdmi (Best) - Insignia NS-50D40SNA14 User Manual

Insignia 50" LED TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see

Using HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight HDMI1 or HDMI2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
DVD or Blu-ray player
HDMI cable
www.insigniaproducts.com
"What connection should I
Side of TV
use?" on page 10.
17