Nat Settings - Grandstream Networks GXP1160 User Manual

LDAP Version
LDAP Name Attributes
LDAP Number Attributes
LDAP Display Name
Max. Hits
Search Timeout
Sort Results
LDAP Lookup
Lookup Display Name

NAT SETTINGS

If the devices are kept within a private network behind a firewall, we recommend using STUN Server. The
following settings are useful in the STUN Server scenario:
FIRMWARE VERSION 1.0.7.4
Selects the protocol version for the phone to send the bind requests. The
default setting is "Version 3".
Specify the "name" attributes of each record which are returned in the LDAP
search result. This field allows the users to configure multiple space separated
name attributes.
Example:
gn
cn sn description
Specifies the "number" attributes of each record which are returned in the
LDAP search result. This field allows the users to configure multiple space
separated number attributes.
Example:
telephoneNumber
telephoneNumber Mobile
Configures the entry information to be shown on phone's LCD. Up to 3 fields
can be displayed.
Example:
%cn %sn %telephoneNumber
Specifies the maximum number of results to be returned by the LDAP server. If
set to 0, server will return all search results. The default setting is 50.
Specifies the interval (in seconds) for the server to process the request and
client waits for server to return. The default setting is 30 seconds.
Specifies whether the searching result is sorted or not. The default setting is
"No".
Configures to enable LDAP number searching when dialing and receiving
calls.
Configures the display name when LDAP looks up the name for incoming call
or outgoing call. This field must be a subset of the LDAP Name Attributes.
Example:
gn
cn sn description
GXP1160/GXP1165 USER MANUAL Page 56 of 67