Hawking Hi-Gain HW7ACX User Manual page 70

Config Mode (3)
Configure
by Push Button (4)
Configure
by client
PinCode (5)
Authentication Mode: The wireless security authentication mode
of this wireless access point will be displayed here. If you do not
enable security function of the wireless access point before WPS
is activated, the access point will auto set the security to WPA
(AES) and generate a set passphrase key for WPS connection.
Passphrase Key: The wireless security key of the access point
will be displayed here.
There are 'Registrar' and 'Enrollee' modes for the WPS
connection. When 'Registrar' is enabled, the wireless clients will
follow the access point's wireless settings for WPS connection.
When 'Enrolle' mode is enabled, the access point will follow the
wireless settings of wireless client for WPS connection.
Click 'Start PBC' to start Push-Button style WPS
setup procedure. This wireless access point will wait for WPS
requests from wireless clients for 2 minutes. The 'WLAN' LED
light on the wireless access point will be steady for 2 minutes
when this wireless access point is waiting for incoming WPS
request.
Please input the PIN code of the wireless client you
wish to connect, and click 'Start PIN' button.
The 'WLAN' LED light on the wireless access point will be
steady when this wireless access point is waiting for incoming
WPS request.
63