Hawking Hi-Gain HW7ACX User Manual page 33

Wireless (1):
ESSID (2):
Band (3):
Shows you if the wireless is enabled/disabled
The HW7ACX transmits in both 2.4GHz and 5GHz WiFi
frequencies. Please input the ESSID (the name used to identify
this wireless access point) for each frequency here. You can
input up to 32 alphanumerical characters. PLEASE NOTE
THAT ESSID IS CASE SENSITIVE.
Default SSID
2.4GHz: Hawking_HW7ACX_2.4GHz
5GHz: Hawking_HW7ACX_5GHz
Please select the wireless band you wish to use. By selecting
different band setting, you'll be able to allow or deny the
wireless client of a certain band.
2.4GHz Band
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only
wireless clients using the wireless band you select (802.11b,
802.11 Draft-N, or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this access
point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N
clients to connect to this access point, select 2.4GHz (B+G+N).
5GHz Band
5GHz (A): this mode allows 802.11a wireless network client to
connect this router (maximum transfer rate 54Mbps for 802.11a
clients).
5GHz (N): this mode allows 802.11n wireless network client to
connect this router (maximum transfer rate 300Mbps for
26