Hawking Hi-Gain HW7ACX User Manual page 34

Channel Number (4):
Associated Clients (5): Click 'Show Active Clients' button and a new popup window will
Adv. IP Address (6)
802.11n clients).
5GHz (A+N): this mode allows 802.11a and 802.11n wireless
network client to connect this router (maximum transfer rate
54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n
clients).
5GHz (AC): this mode allows 802.11ac wireless network client
to connect this router (maximum transfer rate 433Mbps for
802.11ac clients).
5GHz (N+AC): this mode allows 802.11n and 802.11ac wireless
network client to connect this router (maximum transfer rate
150Mbps for 802.11n clients, and maximum 433Mbps for
802.11ac clients).
5GHz (A+N+AC): this mode allows 802.11a, 802.11n and
802.11ac wireless network client to connect this router
(maximum transfer rate 54Mbps for 802.11a clients, maximum
150Mbps for 802.11n clients, and maximum 433Mbps for
802.11ac clients).
Please select a channel number you wish to use. If you know a
certain channel number is being used by other wireless access
points nearby, please refrain from using the same channel
number
appear which contains the information about all wireless clients
connected to this access point. You can click 'Refresh' button in
popup window to keep information up-to-date.
This section allows you to set an IP Address and subnet mask to
fit your network if needed. Uncheck the box to input.
Otherwise, the default IP Address is 192.168.1.240
27