Hawking Hi-Gain HW7ACX User Manual page 53

NOTE: If you don't have special reason to limit the type of allowed
wireless clients, it's recommended to choose '2.4 GHz (B+G+N) and
5GHz (A+N+AC) to maximize wireless client compatibility.
SSID (3):
Channel
Number (4):
Associated Clients (5): Click 'Show Active Clients' button, then an "Active Wireless
Root AP SSID (6):
Site Survey (7):
After you finish the wireless setting, please click 'Apply' button, after you click 'Apply',
the following message will be displayed on your web browser:
This is the name of wireless router. You can type any
alphanumerical characters here, maximum 32 characters. SSID
is used to identify your own wireless router from others when
there are other wireless routers in the same area. Default SSID
is 'default', it's recommended to change default ESSID value to
the one which is meaningful to you, like myhome, office_room1,
etc.
Select the channel you want to use, all the wireless
clients must use the same setting.
Client Table" will pop up. You can see the status of all active
wireless stations that are connecting to the access point.
In 'Universal Repeater' mode, this device can act as a station to
connect to a Root AP. You should assign the SSID of the Root AP
here or click 'Select Site Survey' button to choose a Root AP.
Click 'Select Site Survey' button, then a "Wireless Site Survey
Table" will pop up. It will list all available access points nearby.
You can select one access point in the table and the router will
join wireless LAN through this access point.
46