Samsung SCD-5080 User Manual page 13

installation
1. Attach the installation template to the
selected area and punch 2 holes as
shown in the figure.
2. Use the 2 supplied screws to fix the
camera to the 2 punched holes.
Set the <TOP FRONT> mark
imprinted on the camera to face the
direction of camera monitoring.
3. Adjust the lens in a desired direction by referring to the "Adjusting the
monitoring direction for the camera" section.
4. Attach the dome cover and the shield case to the main body.
M
Pay attention to the direction for assembly.
TOP
FRONT
English_13