1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCD-5083R
  6. User manual

Samsung SCD-5083R User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Super High Resolution WDR

Dome Camera

User Manual
SCD-5083R

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCD-5083R

Summary of Contents for Samsung SCD-5083R

  • Page 1: Dome Camera

    Super High Resolution WDR Dome Camera User Manual SCD-5083R...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCD-5083R SERIES • NTSC MODEL • PAL MODEL SCD-5083RN SCD-5083RP ■ MODEL DESCRIPTION • SCD-5083RX _ SIGNAL SYSTEM • SIGNAL SYSTEM...
  • Page 4 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.

  • Page 6: Fcc Statement

    safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Important Safety Instructions

    Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...

  • Page 8: Table Of Contents

    contents inTroDuCTion Features Components and Accessories Component names and functions insTallaTion Before installation Installation Adjusting the monitoring direction for the camera ConnECTion Connecting to Monitor Connecting to Power Using Coaxial Communications CamEra oPEraTion Menu Configuration Menu Setup TroublEshooTing Troubleshooting sPECifiCaTions Specifications Dimension 8_ contents...

  • Page 9: Introduction

    Without an external sensor, you can use this product to detect motion and generate alarms and thus more efficient monitoring can be achieved. y ssnr4 (samsung super noise reduction) function High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place.

  • Page 10: Components And Accessories

    - English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese ComPonEnTs anD aCCEssoriEs Check if the following items are included in the product package. Quick Manual SCD-5083R SCD-5083R Quick Manual Screws 케이블 구멍...

  • Page 11: Component Names And Functions

    ComPonEnT namEs anD funCTions Dome Cover shield Case ➊ rotate base : control rotating angle of camera. ➌ Vari-focal lens module : 3 ~ 10.0mm (F1.4). ➍ function setup switch : Display the menu on the screen and move the cursor to four ➎...

  • Page 12: Before Installation

    Installation bEforE insTallaTion Ensure you read out the following instructions before installing the camera: y You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. y Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire.
  • Page 13 installation 1. Attach the installation template to the selected area and punch 2 holes as shown in the figure. 케이블 구멍 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. ` Set the <TOP FRONT> mark imprinted on the camera to face the direction of camera monitoring.

  • Page 14: Installation

    Installation aDjusTing ThE moniToring DirECTion for ThE CamEra Tilt Lens rotation ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.

  • Page 15: Connection 15 15 Connecting To Monitor

    ConnECTing To moniTor Connect the Video OUT port on the camera to the video input port of the monitor. Monitor SCD-5083R y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off.

  • Page 16: Using Coaxial Communications

    connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
  • Page 17 - Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below. If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Distance Recommended Cable Specification 300m 3C2V(RG-59/U)

  • Page 18: Camera Operation

    camera operation mEnu ConfiguraTion main sETuP BASIC DAY/NIGHT BACKLIGHT ● ● ● PROFILE ● ● INDOOR ● USER SSDR ● ● ● ● OUTDOOR ● INDOOR WHITE BAL ● AWC  SET MANUAL MERCURY ● ● ● BRIGHTNESS ● LENS ●...
  • Page 19 MAIN SETUP Select the function ▶ 1. PROFILE BASIC Change the status using the Function using the Function 2. SSDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
  • Page 20 If you select the ITS, the shutter will be set to 1/200 sec. Noise can be detected at night. ssDr (samsung super Dynamic range) If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
  • Page 21 White bal (White balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by 1. PROFILE BASIC using the Function Setup switch so 2. SSDR that the arrow indicates ‘White Bal’ . ▶...
  • Page 22 camera operation EXPosurE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. 2. Select a desired mode using the EXPOSURE SETUP Function Setup switch. ▶ BRIGHTNESS ---- ---- ...
  • Page 23 baCKlighT The camera uses our own W7 chips that are designed to clearly display the object and the background despite severe reverse light. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch. so that the arrow indicates ‘BACKLIGHT’. 2.
  • Page 24 camera operation y WDr : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. - LEVEL : Select one from low, WDR SETUP med, high to adjust the LEVEL MIDDLE ▶ 1. brightness of the WDR RETURN setup.
  • Page 25 sPECial 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the SPECIAL SETUP Function Setup switch. DISPLAY ▶ 1. y DisPlaY COMM ADJ IMAGE ADJ ❶M...

  • Page 26: Image Adj

    camera operation - FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. y Comm aDj (Communication adjustment) : - COAX : You can select whether to COMM SETUP use COAX communication.
  • Page 27 y DaY/nighT : You can display pictures in color or in black and white. ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’. ❷ Select a desired mode using the Function Setup switch according to the picture display you want.

  • Page 28: Video Analytics

    camera operation - Manual : Depending on the defog DEFOG MANUAL SETUP level set by the user, adjust LEVEL MIDDLE ▶ the clarity of image. (LOW, RETURN MIDDLE, HIGH) - OFF : Released state If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be also reduced.
  • Page 29 - TAMPERING : If the screen view TAMPERING is obstructed or the SENSITIVITY MIDDLE ▶ camera location ALARM OUT is changed, RETURN tampering detection, you can issue an event signal by setting it. y SENSITIVITY : Set the sensitivity to tampering detection. y ALARM OUT : Outputting of detection signals can be set.
  • Page 30 camera operation ` MODE : Determine whether to use the selected area. ` SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the higher level, the more sensitive. ` TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted. ` RETURN : Return to the MOTION DET menu. y NON DET.
  • Page 31 to use the fence selected in the FENCE. ` TYPE : Two types, line and area, of fences are available. ` POSITION : Defines the position and detection direction of a line or fenced area. 1) LINE FENCE LINE FENCE SEL POS - SEL POS : Selects a ▶...
  • Page 32 camera operation y INDICATOR : Outlines an object on the screen in a box when its movement matches a custom Motion Type. In the following cases, the appear/indicator may malfunction. - When multiple movements occur randomly - When a fixed object keeps moving in the same location - When a new object covers an object with changes y ALARM OUT : When object movement is detected, the detection signal will be outputted.
  • Page 33 - Severe snow, rain and wind. Sunset or sunrise - If the size is greater than the max size or smaller than the min size, motion is not detected. To avoid false detection caused by noises, set the max/min detection size suitable for the installation environment.

  • Page 34: Troubleshooting

    troubleshooting TroublEshooTing If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected.

  • Page 35: Specifications

    specifications sPECifiCaTions sCD-5083rn sCD-5083rP Video Imaging Device 1/3” 1.3M CMOS 1312(H) x 1069(V) Total Pixels Effective Pixels 1305(H) x 1049(V) Scanning System Progressive Scan Internal Synchronization Frequency H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Color : 1000 TVL Horizontal Resolution B/W : 1000 TVL...
  • Page 36 specifications sCD-5083rn sCD-5083rP Contrast Enhancement SSDR ( Off / On ) Digital Noise Reduction SSNR4 ( Off / On ) Defog AUTO / MANUAL / OFF Purple Fringe Reduction Purple Fringe Reduction ( Off / Low / Middle / High) Digital Image Stabilization Off / On Off / On Tampering...

  • Page 37: Dimension

    DimEnsion Unit: mm English_37...
  • Page 38 MEMO...
  • Page 39 SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660...

Table of Contents