Samsung SCD-2020R Series User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCD-2020R Series
  6. User manual
Samsung SCD-2020R Series User Manual

Samsung SCD-2020R Series User Manual

High resolution d/n ir dome camera
Hide thumbs Also See for SCD-2020R Series:
Table of Contents

Advertisement

Quick Links

High Resolution D/N IR

Dome Camera

User Manual
SCD-2020R

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCD-2020R Series

Summary of Contents for Samsung SCD-2020R Series

  • Page 1: Dome Camera

    High Resolution D/N IR Dome Camera User Manual SCD-2020R...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCD-2020R SERIES • NTSC MODEL • PAL MODEL SCD-2020RN SCD-2020RP ■ MODEL DESCRIPTION • SCD-2020RX _ SIGNAL SYSTEM •...

  • Page 4: Safety Information

    safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 fi re or electric shock. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.

  • Page 6: Fcc Statement

    safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Important Safety Instructions

    important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...

  • Page 8: Table Of Contents

    contents INTRODUCTION Features What’s included Component names and Functions INSTALLATION Installation Adjust the panning and tilting while watching the monitor CONNECTION Connecting to Monitor Connecting to Power SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations Dimension 8_ contents...

  • Page 9: Introduction

    SONY CCD, the camera produces clear picture quality with a horizontal resolution of 600 TV lines for color and 700 TV lines for BW SSNR3 (Samsung Super Noise Reduction) Function The high-performance W-V DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
  • Page 10 HLC(High Light Compensation), SENS-UP, FLIP (H/V-REV), D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY functions are provided. WHAT’S INCLUDED Check if the following items are included in the product package. High Resolution D/N IR Dome Camera User Manual SCD-2020R SCD-2020R Instruction Manual M4 Tapping Screw 3EA 10_ introduction...

  • Page 11: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS FRONT Pan Base : control panning angle of camera Tilt Base : control tilting angle of camera Lens Module : f=3.6mm,F2.0(IR Lens) Power Input Connector Video Output Jack Function Setup Switch : displays the OSD menu and moves the cursor up, down, left,and right amend or confirm changes.
  • Page 12 installation INSTALLATION Separate the dome cover by counterclockwise rotation. Latch Main Body (Camera) Unlocking Locking Direction direction (Clockwise) Dome Cover [Figure-1] To install the dome cover on the camera body, turn the latches in locking direction as shown in the figure 1. ...
  • Page 13 WHEN USING THE CEILING BRACKET An arrow for installing directions Ceiling bracket M4 tapping screw (provided) Locking direction Unlocking direction Dome Cover Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it counterclockwise. (refer to the picture in 'Notes' on page 12) Adjust the camera lens to face the area to be monitored and fi...
  • Page 14 installation Pan Base fixation screw M4 tapping screw [Figure-2]  If you want to install the camera with the ceiling bracket combined, fi x it using two M4 tapping screws at the side of the main body(refer to the [Figure-2] on page 14) 14_ installation...

  • Page 15: Adjust The Panning And Tilting

    ADJUST THE PANNING AND TILTING WHILE WATCHING THE MONITOR Tilt Base fixation screw 176˚ Pan Base fixation screw 176˚ You can adjust the camera to point in any direction by using the pan, Tilt mechanism. Pan Base can rotates by ±176°(total 352°) Tilt Base covers 75˚...

  • Page 16: Connecting To Monitor

    connection CONNECTING TO MONITOR Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. Monitor CCTV Camera As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. CONNECTING TO POWER Connect the adaptor to the power input connector as shown in the fi...
  • Page 17 When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) (0.22mm2) (0.33mm2) (0.52mm2) (0.83mm2) Resistance ( /m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may af- fect the performance of the camera.

  • Page 18: Menu Confi Gration

    setup MENU CONFIGRATION Setup Menu ● ● LENS SHADE ● ● ● BRIGHTNESS SHUTTER EXPOSURE ● ● SENS-UP RETURN ● ATW ● OUTDOOR ● INDOOR WHITE BALANCE ● MANUAL ● AWC SET ● ● SSDR ● ● ● BACKLIGHT ● ●...
  • Page 19 MAIN SETUP 1.LENS SHADE Change the status Select the function 2.EXPOSURE by moving the by moving up or setup switch left or 3.WHITE BAL down direction right. of function setup 4.SSDR switch. 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired function using the Function Setup switch. Place the cursor over a desired item.
  • Page 20 setup EXPOSURE When the SETUP menu screen is displayed, MAIN SETUP select EXPOSURE by using the Function 1.LENS SHADE Setup switch so that the arrow indicates 2.EXPOSURE 'EXPOSURE'. 3.WHITE BAL Select a desired mode using the Function Setup switch. BRIGHTNESS : Adjusts the video brightness. EXPOSURE SETUP Â...
  • Page 21  If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by adjusting the SENS-UP level. (x2 ~ x512)  Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an after-image will appear.
  • Page 22 White Balance operation may become unstable. SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas.
  • Page 23 BACKLIGHT This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, unlike conventional cameras, by adopting a proprietary W-V DSP chip. MAIN SETUP When the SETUP menu screen is displayed, 1.LENS SHADE select ‘BACKLIGHT’...
  • Page 24 setup OFF : Not being used Select a desired mode using the Function Setup switch and press the switch.  Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. ...
  • Page 25 DAY/NIGHT You can display pictures in color or black and white. When the SETUP menu screen is displayed, MAIN SETUP select ‘DAY/NIGHT’ by using the Up and 1.LENS SHADE Down buttons so that the arrow indicates 2.EXPOSURE ‘DAY/NIGHT’. 3.WHITE BAL Select a desired mode using the Left and 4.SSDR Right buttons according to the picture...
  • Page 26 setup  You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’. At this time, the exchange between DAY mode and NIGHT mode operates as like selecting ‘COLOR’ mode.  The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable camera operation.
  • Page 27 FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture. RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to the SPECIAL menu.
  • Page 28 When the position is determined, select ’END’ and press the Function Setup switch to return to the SPECIAL menu. SYNC : Because the input power of SCD-2020R is DC, SYNC is fi xed at INT. INT : Internal Synchronization Type MOTION DET :...
  • Page 29 XPOS : Determines the coordinate of the horizontal axis for SEL POS. YPOS : Determines the coordinate of the vertical axis for SEL POS. FILL SET : Fills in a selected MD area. The color of fi lling is sequentially selected as brown, orange, blue, cyan, yellowish green, yellow, magenta and red.
  • Page 30 setup  As the DIS function uses the digital zoom the camera's resolution will decrease.  DIS doesn’t operate when background illumination is too low.  DIS doesn’t operate when object pattern is monotonic as like sky or white wall. ...

  • Page 31: Troubleshooting

    troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are fi...

  • Page 32: Specifi Cations

    specifications SPECIFICATIONS SCD-2020RN SCD-2020RP VIDEO Imaging Device 1/3” Super HAD CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2 : 1 Interlace Synchronization Internal Frequency H:15.734KHz / V:59.94Hz H:15.625KHz / V:50Hz Horizontal Resolution Color : 600 TV lines, B/W : 700 TV lines Min.
  • Page 33 SCD-2020RN SCD-2020RP Backlight BLC / HLC / Off Compensation Contrast Enhancement SSDR ( Off/On ) Digital Noise Reduction SSNR (Off / On) Digital Image Stabilization Off / On Motion Detection Off / On (8 programmable zones) Privacy Masking Off / On (12 programmable zones) Sens-up 2x ~ 512x (Frame Integration)

  • Page 34: Dimension

    specifications DIMENSION Ø107.6 83.7mm 81.6mm 34_ specifi cations...
  • Page 35 EN 50081-1 : 1992 EMC-Directive 89/336 EEC and 92/31/EEC EN 50130-4 : 1996 We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s). Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe Signature Signature Full Name...
  • Page 36 MEMO...
  • Page 37 MEMO...
  • Page 38 MEMO...
  • Page 39 MEMO...
  • Page 40 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungtechwin.com...

This manual is also suitable for:

Scd-2020rnScd-2020rp

Table of Contents