Samsung SCD-5080 User Manual page 30

camera operation
- If an object fixed in the same location keeps moving
- Moving away from the camera or approaching the camera. Little location change on the
screen.
- If a moving object approaches the camera
- If random objects obstruct the view of each other
- If more than one objects merge or one object divides into multiple objects
- If an object moves too fast (the same object should have overlapping areas between the
consecutive frames)
- If there are reflections/blurs/shadows created by a strong light such as direct sunlight,
lights, and headlights.
- Severe snow, rain and wind. Sunset or sunrise
- If the size is greater than the max size or smaller than the min size, motion is not detected.
To avoid false detection caused by noises, set the max/min detection size suitable for the
installation environment.
But the same movement in the same location can cause a different detection size. So,
include margins when you set the min/max detection size.
ExiT
Select a desired EXIT mode using the Function Setup switch depending on the
camera purpose.
saVE : Save the current settings and exit the MAIN SETUP menu.

noT saVE : Do not save the current settings and exit the MAIN SETUP menu.

rEsET : Revert camera to factory settings. (The language, communication and

30_ camera operation
lens settings will remain the same).