Advertisement
Quick Links
Advertisement
Related Manuals for Samsung SCD-5082 Series
Summary of Contents for Samsung SCD-5082 Series
- Page 1 Super High Resolution Dome Camera User Manual SCD-5082...
- Page 2 Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
- Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCD-5082 SERIES • NTSC MODEL • PAL MODEL SCD-5082N SCD-5082P ■ MODEL DESCRIPTION • SCD-5082X SIGNAL SYSTEM • SIGNAL SYSTEM...
- Page 4 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
- Page 5 If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
- Page 6 safety information fCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.
- Page 7 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
-
Page 8: Table Of Contents
contents inTroDuCTion Features Components and Accessories Component names and functions insTallaTion Before installation Installation Adjusting the monitoring direction for the camera ConnECTion Connecting to Monitor Connecting to Power Using Coaxial Communications CamEra oPEraTion Menu Configuration Menu Setup TroublEshooTing Troubleshooting sPECifiCaTions Specifications Dimension _ contents... -
Page 9: Introduction
0.02Lux (F1.4, 30IRE), 0.0006Lux (1sec, F1.4, 30IRE) B/W : 0.005Lux (F1.4, 50IRE), 0.0001Lux (1sec, F1.4, 50IRE) 0.002Lux (F1.4, 30IRE), 0.00006Lux (1sec, F1.4, 30IRE) ssnr4 (samsung super noise reduction) function High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place. - Page 10 introduction Communication Coaxial communication methods are supported. - Coaxial Communications : Pelco Coaxitron The camera’s OSD is complimented by 17 languages. - English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese ComPonEnTs anD aCCEssoriEs Check if the following items are included in the product package.
- Page 11 ComPonEnT namEs anD funCTions ➍ Dome Cover shield Case rotate base : control rotating angle of camera. Vari-focal lens module : 3~10mm (F1.4). ➍ function setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.
-
Page 12: Installation
Installation bEforE insTallaTion Ensure you read out the following instructions before installing the camera: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. ... - Page 13 installation Attach the installation template to the selected area and punch 2 holes as shown in the figure. Use the 2 supplied screws to fix the camera to the 2 punched holes. Set the <TOP FRONT> mark FRONT imprinted on the camera to face the direction of camera monitoring.
- Page 14 Installation aDJusTing ThE moniToring DirECTion for ThE CamEra FRONT Lens rotation Tilt Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.
-
Page 15: Connection
connection ConnECTing To moniTor Connect the Video OUT port on the rear panel of the camera to a monitor. Monitor SCD-5082 As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. ... -
Page 16: Using Coaxial Communications
connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 As shown in the table above, voltage decreases as the wire gets longer. ... - Page 17 Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below. If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Recommended Cable Distance Specification 300m...
- Page 18 camera operation mEnu ConfiguraTion main sETuP ● BASIC ● DAY/NIGHT ● BACKLIGHT PROFILE INDOOR USER ● ● ● SSDR ● ● OUTDOOR INDOOR ● ● ● WHITE BAL ● AWC SET MANUAL MERCURY ● ● ● BRIGHTNESS ● LENS ●...
- Page 19 MAIN SETUP Select the function ▶ 1. PROFILE BASIC Change the status using the Function using the Function 2. SSDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE Press the Function Setup switch. Main SETUP menu is displayed on the monitor screen.
- Page 20 If you select the traffic monitoring mode, the shutter will be set to 1/200 sec. Noise can be detected at night. ssDr (samsung super Dynamic range) If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
- Page 21 White bal (White balance) Use the White Balance function to adjust the screen color. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by 1. PROFILE BASIC using the Function Setup switch so 2. SSDR that the arrow indicates ‘White Bal’ . ▶...
- Page 22 camera operation ExPosurE When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. Select a desired mode using the Function Setup switch. EXPOSURE SETUP ▶ BRIGHTNESS ---- ---- brighTnEss : Adjusts the video ...
- Page 23 baCKlighT When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch. so that the arrow indicates ‘BACKLIGHT’. Select a desired mode using the Function Setup switch depending on the camera purpose. usEr blC : Enables a user to select a desired area on BLC SETUP a picture and view that area more clearly.
- Page 24 camera operation sPECial When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. Select a desired mode using the SPECIAL SETUP Function Setup switch. DISPLAY ▶ 1. DisPlaY COMM ADJ ...
- Page 25 FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) LANGUAGE : You can select the menu language according to your requirements. RETURN : Return to the SPECIAL menu. Comm aDJ (Communication adjustment) : COAX : You can select whether to COMM SETUP use COAX communication.
- Page 26 camera operation DaY/nighT : You can display pictures in color or in black and white. ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’. ❷ Select a desired mode using the Function Setup switch according to the picture display you want.
- Page 27 DEfog : Y ou can use the defog mode to allow the camera to automatically detect the fog density of the screen and display a clear image despite smog, fog or general poor visibility. ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DEFOG’.
- Page 28 camera operation ViDEo analYTiCs ❶ If the SPECIAL menu screen is VIDEO ANALYTICS displayed, use the Function Setup ▶ 1. TAMPERING switch so that the arrow indicates 2. MOTION ‘VIDEO ANALYTICS’. RETURN ❷ Select a desired mode using the Function Setup switch.
- Page 29 DET. AREA : Set the areas of MOTION DETECT AREA motion detection. SEL AREA AREA ▶ SEL AREA : Select from four MODE areas that users SENSITIVITY ---- ---- want. -------- MODE : Determine whether to BOTTOM -------- ...
- Page 30 camera operation - If an object fixed in the same location keeps moving - Moving away from the camera or approaching the camera. Little location change on the screen. - If a moving object approaches the camera - If random objects obstruct the view of each other - If more than one objects merge or one object divides into multiple objects - If an object moves too fast (the same object should have overlapping areas between the consecutive frames)
- Page 31 troubleshooting TroublEshooTing If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. Check that the power cord and line connection between the ...
- Page 32 specifications sPECifiCaTions sCD-5082n sCD-5082P Video Imaging Device 1/3” 1.3M CMOS Total Pixels 1312(H) x 1069(V) 1305(H) x 1049(V) Effective Pixels Progressive Scan Scanning System Internal Synchronization H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Frequency Color:1000TVL Horizontal Resolution...
- Page 33 sCD-5082n sCD-5082P Digital Noise Reduction SSNR 4 ( Off / On ) Defog AUTO / MANUAL / OFF Purple Fringe Reduction ( Off / Low / Middle / High) Purple Fringe Reduction Digital Image Stabilization Off / On Off / On Tampering Off / On Motion Detection...
- Page 34 DimEnsion Unit: mm (inch) 3_ specifications...
- Page 35 MEMO...
- Page 36 SALES NETWORK SAMSUNG TECHWIN CO., LTD. 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 2nd Floor, No.