Download
Share
Print this page
Samsung Wisenet SCD-5081R User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. Wisenet SCD-5081R
  6. User manual

Samsung Wisenet SCD-5081R User Manual

High resolution ir dome camera
Hide thumbs

Advertisement

Quick Links

Download this manual
High Resolution IR Dome Camera
User Manual
SCD-5081R

Advertisement

loading

Related Manuals for Samsung Wisenet SCD-5081R

Summary of Contents for Samsung Wisenet SCD-5081R

  • Page 1 High Resolution IR Dome Camera User Manual SCD-5081R...
  • Page 2 High Resolution IR Dome Camera User Manual Copyright ©2016 Co., Ltd. All rights reserved. Hanwha Techwin Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCD-5081R SERIES • NTSC MODEL • PAL MODEL SCD-5081RN SCD-5081RP ■ MODEL DESCRIPTION • SCD-5081RX _ SIGNAL SYSTEM • SIGNAL SYSTEM N →...
  • Page 4 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
  • Page 6 safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
  • Page 7 important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  • Page 8: Table Of Contents

    contents inTroDuCTion Features Components and Accessories Component names and functions insTallaTion Before installation Installation Adjusting the monitoring direction for the camera ConnECTion Connecting to Monitor Connecting to Power Using Coaxial Communications CamEra oPEraTion Menu Configuration Menu Setup TroublEshooTing Troubleshooting sPECifiCaTions Specifications Dimension 8_ contents...

  • Page 9: Introduction

    Without an external sensor, you can use this product to detect motion and generate alarms and thus more efficient monitoring can be achieved. y ssnr4 (samsung super noise reduction) function High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place.
  • Page 10 introduction y Communication Coaxial communication methods are supported. - Coaxial Communications : Pelco Coaxitron y osD The camera’s OSD is complimented by 17 languages. - English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese ComPonEnTs anD aCCEssoriEs Check if the following items are included in the product package.
  • Page 11 ComPonEnT namEs anD funCTions Dome Cover ➊ shield Case Vari-focal lens module : 3 ~ 10.0mm (F1.4). ❸ rotate base : control rotating angle of camera. ➍ Pan base : Control panning angle of camera. ❺ Video output Terminal ➏ function setup switch : Display the menu on the screen and move the cursor to four ❼...

  • Page 12: Installation

    Installation bEforE insTallaTion Ensure you read out the following instructions before installing the camera: y You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. y Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire.
  • Page 13 installation 1. Attach the installation template to the selected area and punch 2 holes as shown in the figure. 케이블 구멍 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. ` Set the <TOP FRONT> mark imprinted on the camera to face the direction of camera monitoring.
  • Page 14 Installation aDjusTing ThE moniToring DirECTion for ThE CamEra Tilt Lens rotation ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.

  • Page 15: Connection

    connection ConnECTing To moniTor Connect the Video OUT port on the camera to the video input port of the monitor. Monitor SCD-5081R y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off. ConnECTing To PoWEr You can connect power as shown in the following figure.

  • Page 16: Using Coaxial Communications

    connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
  • Page 17 - Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below. If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Distance Recommended Cable Specification 300m 3C2V(RG-59/U)
  • Page 18 camera operation mEnu ConfiguraTion main sETuP ● ● ● BASIC DAY/NIGHT BACKLIGHT PROFILE ● ● ● INDOOR USER ● ● SSDR ● ● ● OUTDOOR INDOOR WHITE BAL ● ● AWC  SET ● MANUAL MERCURY ● ● ● BRIGHTNESS LENS SHUTTER EXPOSURE...
  • Page 19 MAIN SETUP Select the function  1. PROFILE BASIC Change the status using the Function using the Function 2. SSDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
  • Page 20 If you select the ITS, the shutter will be set to 1/200 sec. Noise can be detected at night. ssDr (samsung super Dynamic range) If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
  • Page 21 White bal (White balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by 1. PROFILE BASIC using the Function Setup switch so 2. SSDR that the arrow indicates ‘White Bal’ . ...
  • Page 22 camera operation EXPosurE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. 2. Select a desired mode using the Function Setup switch. y brighTnEss : Adjusts the video EXPOSURE SETUP brightness.
  • Page 23 baCKlighT The camera uses our own W7 chips that are designed to clearly display the object and the background despite severe reverse light. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch. so that the arrow indicates ‘BACKLIGHT’. 2.
  • Page 24 camera operation sPECial 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the SPECIAL SETUP Function Setup switch.  DISPLAY y DisPlaY COMM ADJ IMAGE ADJ If the SPECIAL menu screen is...
  • Page 25 - FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. y Comm aDj (Communication adjustment) : - COAX : You can select whether to COMM SETUP use COAX communication.
  • Page 26 camera operation y DaY/nighT : You can display pictures in color or in black and white. If the SPECIAL menu screen is displayed, use the Function Setup switch so ➊ that the arrow indicates ‘DAY/NIGHT’. Select a desired mode using the Function Setup switch according to the picture display you want.
  • Page 27 M If the SPECIAL menu screen is ➊ DEFOG MANUAL SETUP displayed, use the Function Setup LEVEL MIDDLE  1. switch so that the arrow indicates RETURN ‘DEFOG’. Select a desired mode using the Function Setup switch. - AUTO : Adjust the level automatically. - Manual : Depending on the defog level set by the user, adjust the clarity of image.
  • Page 28 camera operation y ViDEo analYTiCs If the SPECIAL menu screen is ➊ VIDEO ANALYTICS displayed, use the Function Setup  1. TAMPERING switch so that the arrow indicates 2. MOTION ‘VIDEO ANALYTICS’. 3. INTELLIGENCE Select a desired mode using the RETURN Function Setup switch.
  • Page 29 y DET. AREA : Set the areas of MOTION DETECT AREA motion detection. SEL AREA AREA  1. ` SEL AREA : Select from four MODE areas that users SENSITIVITY ---- ----  want. --------  ` MODE : Determine whether to BOTTOM -------- ...
  • Page 30 camera operation y DET. SIZE : Selects an object size to detect on the screen. y FENCE ` SEL FENCE : You can select VIRTUAL FENCE up to 4 FENCE.  1. SEL FENCE FENCE1 ` MODE : Determines whether MODE to use the fence 3.
  • Page 31 y ENTER/EXIT : Detects all objects entering and exiting the fenced area. - RETURN : Return to the VIRTUAL FENCE menu. ` COUNT : Displays how many times a subject passes over the fence on the screen. ` RETURN : Return to the INTELLIGENCE menu. y APPEAR : Detects an object that emerges or disappears from the screen, or stays onscreen without movement.
  • Page 32 camera operation - If a moving object approaches the camera - If random objects obstruct the view of each other - If more than one objects merge or one object divides into multiple objects - If an object moves too fast (the same object should have overlapping areas between the consecutive frames) - If there are reflections/blurs/shadows created by a strong light such as direct sunlight, lights, and headlights.
  • Page 33 troubleshooting TroublEshooTing If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected.
  • Page 34 specifications sPECifiCaTions sCD-5081rn sCD-5081rP Video Imaging Device 1/3” 1.3M CMOS Total Pixels 1304(H) x 1074(V) 1296(H) x 1032(V) Effective Pixels Progressive Scan Scanning System Internal Synchronization H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Frequency Color : 1000 TVL Horizontal Resolution...
  • Page 35 sCD-5081rn sCD-5081rP Defog AUTO / MANUAL / OFF Purple Fringe Reduction Purple Fringe Reduction ( Off / Low / Middle / High) Digital Image Stabilization Off / On Tampering Off / On Motion Detection Off / On Intelligent Video Fence, Apear_Disappear, Counting ( Off / On ) Off / On (24 programmable zones with 4points polygonal masking) Privacy Masking Off / Low / Middle / High...
  • Page 36 DimEnsion Unit: mm 36_ specifications...
  • Page 37 MEMO...
  • Page 38 Head Office 86 Cheonggyecheon-ro Jung-gu Seoul 04541 Korea Tel +82.2.729.5277, 5254 Fax +82.2.729.5489 www.hanwha-security.com Hanwha Techwin America 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 Hanwha Techwin Europe 2nd Floor, No. 5 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, UK Tel +44.1932.82.6700 Fax +44.1932.82.6701...