Customize Page Displays - Lowrance LMS-334c iGPS Installation And Operation Instructions Manual

Configure a map fix so the unit can find a position on a printed map.
Press → to
S
ELECT
Select the waypoint you saved the reference point under and press
The unit displays a waypoint information screen with the command
selected. Press
A O
S RIGIN
Fix menu. Finally, press
C S
OORDINATE YSTEM
All position information now shows as a distance from the reference
point you chose.

Customize Page Displays

Every Page display option except Full Map has customizable data boxes
to provide constant on-screen information.
The data available from your unit is divided into categories in the Data
Viewer menu. These categories include GPS Data, Navigation, Trip
Calculator, Time, Sonar Data and Sensor Data. You can select items
from any of these categories for display in any data box.
To change the information displayed in a data box:
On the Page display you want to change, press
The selected data box will flash to show it is ready to be customized. Press
to select a different box or press
ENT
Each category will have a "+" or "–" symbol next to it. A category with a
"+" is closed, meaning it will have to opened before you will be able to
see the data options it contains. When a category has a "–" symbol in
front of it, the category is open. You will see its data options listed below
it. Each data option will be flanked by a checkbox.
| |
O ENT
RIGIN
and the unit returns to the Configure Map
ENT
EXIT
| , select
ENT M
| to bring up the waypoint list.
ENT ENT
to close this menu. Now press ↑ to
from the list and press
F
AP IX
. A list of categories will appear.
ENT
148
|↓ to
MENU C
USTOMIZE
.
ENT
S
ET
| .
ENT EXIT
| .
ENT