Customize Page Displays - Lowrance iFinder Explorer Operating Instructions Manual

Press ↓ to
S
ELECT
with three options: My Waypoints, Map Places and Highway Exits. If
you saved the reference point as a waypoint, choose
pressing |
ENT
point nearest your location at the top. Use the ↓ ↑ keys to select the
waypoint you want to assign as a reference point and press
unit displays a waypoint information screen with the command
selected. Press
O
RIGIN
Fix menu. Press
| , select
ENT
TEM
mation now will be shown as a distance from the reference waypoint
you chose. Press

Customize Page Displays

The Digital Data, Navigation, Compass and Map pages all have cus-
tomizable options available in Advanced Mode. The options give you
control over what information will be viewed on each page.
Customize Digital Data Page
While on the Digital Data Page, press
data box begins to flash. Use the arrow keys to select a box containing
data you want to change. With the desired box highlighted and flash-
ing, press
ENT
category, then press
page, where the new data will be displayed in the data box you selected.
You can repeat these steps to change the display in another box. When
you are satisfied with your changes, press
NOTE:
To change the data in the large data box at the top of the Digital
Data page use the ↑ ↓ keys. There are three data options you can
rotate through: Position, Altimeter History and Pressure History.
Customize Navigation Page
While on the Navigation Page press
to select a data option you want to display and press
turn on (check) or turn off (uncheck) the selected data option. Check or
uncheck other data options to change the data displayed in other boxes.
If you get an Overlay Limit Exceeded message, you must turn off (un-
check) a data category before you will be able to add another category.
When you are satisfied with the changes, press
Customize Compass Page
While on the Compass Page press
to select a data option you want to display and press
| , which will launch the Select Point window
O ENT
RIGIN
, which will bring up the Waypoint list with the way-
ENT
and the unit returns to the Configure Map
ENT
to close this menu. Now press ↑ to
EXIT
from the list and press
M F
AP IX
repeatedly to return to the main page display.
EXIT
to open a list of data options. Use ↓ ↑ to select a data
. You will be directed back the Digital Data
ENT
|↓ to
MENU
.
EXIT
|↓ to
MENU
EXIT
|↓ to
MENU C
USTOMIZE
78
M W
Y AYPOINTS
C
. All position infor-
ENT
C
USTOMIZE
|
C ENT
USTOMIZE
, which will
ENT
.
. Use ↓ or ↑
|
ENT
, which will
ENT
by
. The
ENT
S A
ET S
S
OORD YS-
| . A
ENT
. Use ↓ ↑