Customize Page Displays; Customize Digital Data Page - Lowrance iFINDER Expedition C Operation Instructions Manual

Press ↓ to
S
ELECT
with three options: My Waypoints, Map Places and Highway Exits. If
you saved the reference point as a waypoint, choose
pressing |
ENT
with the waypoint nearest your location at the top. Use the ↓ ↑ keys to
select the waypoint you want to assign as a reference point and press
. The unit displays a waypoint information screen with the com-
ENT
mand
S A O
ET S
figure Map Fix menu. Press
|
C S
OORD YSTEM
tion information now will be shown as a distance from the reference
waypoint you chose. Press
display.

Customize Page Displays

The Digital Data, Navigation and Map pages all have customizable op-
tions available in Advanced Mode. The option gives you control of some
settings and of data that will be displayed on some of the pages.
NOTE:
In Advanced Mode, you can remove pages you do not want to have
in the Pages rotation. Press
S S
YSTEM ETUP
press
ENT
to turn them on (check) or turn them off (uncheck).

Customize Digital Data Page

While on the Digital Data Page, press
data box begins to flash. Use the arrow keys to select a box containing
data you want to change. With the desired box highlighted and flash-
ing, press
ENT
category and press
category. Highlight a desired data option and press
(check) or off (uncheck). Press
where the new data will be displayed in the data box you selected. You
can repeat these steps to change the data in another box. When you are
satisfied with your changes, press
NOTE:
To change the data in the large data box at the top of the Digital
Data page use the ↑ ↓ keys. There are three data options you can
rotate through: Position, Altimeter History and Pressure History.
|
O ENT
RIGIN
. That will launch the Find By Nearest waypoints list
ENT
selected. Press
RIGIN
, select
ENT M
and press
. Use the ↓ ↑ keys to select desired pages, then press
to open a list of data categories. Use ↓ ↑ to select a data
. Scroll through the data options for the selected
ENT
, which will launch the Select Point window
and the unit returns to the Con-
ENT
to close this menu. Now press ↑ to
EXIT
from the list and press
F
AP IX
repeatedly to return to the main page
EXIT
MENU
. Press ↓ to
ENT
to return to the Digital Data page,
EXIT
.
EXIT
78
| , then scroll down to
MENU
C V
HOOSE IEWABLE
|↓ to
MENU C
ENT
M W
Y AYPOINTS
. All posi-
ENT
and
P
AGES
ENT
| . A
ENT
USTOMIZE
to turn it on
by