Satellite Status Page - Lowrance LMS 330C Installation And Operation Instructions Manual

GPS Setup command: sets various GPS receiver options.
System Setup command: sets general configuration options.
Sun/Moon Calculations command: finds the rising and setting time
of the sun and the moon.
Trip Calculator command: shows trip status and statistics.
Timers command: controls the up timer, down timer and alarm clock
settings.
Browse MMC Files command: this allows you to view the installed
MMC card and the files it contains.
Pages
The unit has four Page displays that represent the four major operating
modes. They are the Satellite Status Page, the Navigation Page, the Map
Page and Sonar Page. They are accessed by pressing the
using → or ← to select a Page. (Clear the Pages Menu by pressing
Pages Menu, showing some Sonar display options.

Satellite Status Page

The Satellite Status Page provides detailed information on the status of
the unit's satellite lock-on and position acquisition. To get to the Satel-
lite Status Page: Press the
(Clear the Pages Menu by pressing
This page represents a GPS function, so it is discussed in much greater
detail in Sec. 6.
No matter what Page you are on, a flashing current position indica-
tor/question mark symbol and flashing GPS data displays indicate that
satellite lock has been lost and there is no position confirmed.
key, then use → or ← to select
PAGES
.)
EXIT
50
key, then
PAGES
.)
EXIT
S
TATUS
.