New Trail; Trail Visible/Invisible And Other Trail Options; Transparency - Lowrance LMS 330C Installation And Operation Instructions Manual

New Trail

To manually start a new trail, in the Trails Menu, make sure
N T
EW RAIL
is highlighted and press .
ENT

Trail Visible/Invisible and Other Trail Options

The name, maximum number of points in the trail, activity, and visi-
bility are all changed on the Edit Trail menu screen. The Active setting
determines whether or not the unit is recording new points for a par-
ticular trail.
On the Edit Trail menu, press ↓ or ↑ to highlight the section you wish
to change, then press . Make your changes, then press to erase
ENT EXIT
this menu. Related trail functions are discussed in further detail under
the Trails topic in Sec. 7, Advanced GPS Operations.

Transparency

Use the transparency menu to adjust the transparency of menu win-
dows. A high transparency allows you to continue monitoring the
screen's display while adjusting feature settings, though the text of the
menus may fade until it is unreadable. A low transparency will usually
make menu text easier to read, at the cost of watching your display.
Experiment with this feature until you find the right level of transpar-
ency for your eyes.
Main Menu with Transparency command selected.
To adjust Menu Transparency level:
Press | |↓ to | . The slider bar
MENU MENU T ENT T
RANSPARENCY RANSPARENCY
appears. Press ↑ or ↓ to move the bar. The lower end of the scale makes
the menus opaque; the upper end is maximum transparency.
172