Lowrance LMS 330C Installation And Operation Instructions Manual page 123

NOTE:
This example requires the Point of Interest (POI) database included
with a high detail MapCreate 6 custom map.
After the unit has acquired a position:
1. Press |↓ to
WPT
2. You could search the entire restaurant category, but in this example
we will narrow our search. Press → to
| .
N ENT
EAREST
3. The unit says it is calculating, then a list of restaurants appears,
with the closest at the top of the list, and the farthest at the bottom of
the list. The nearest is highlighted.
Find Waypoint Menu, left; Category Selection menu, center; and list of
4. If you wish, you could scroll ↑ or ↓ here to select another restaurant,
but for now we will just accept the nearest one. Press
5. The POI information screen appears. (This is how you can use this
unit as a business phone directory!) If you wanted to navigate there,
you could press Enter, since the Go To waypoint command is high-
lighted. But we just want to see it on the map, so press → to
| .
M ENT
AP
POI-R
ESTAURANTS
the nearest restaurants, right.
.
F
AST
115
|
F C ENT
OOD HAINS
.
ENT
|↓ to
F O
IND N