Lowrance HD LCX-110C Operation Instructions Manual page 167

3. Expand any categories that might contain data you want to display.
Then press ↓ or ↑ to select a data option.
4. With the data option highlighted, press
uncheck it (turn it off). As you turn it on, the data will appear on top of
the screen. Every Page display has a maximum number of items you
can show using the Overlay Data command.
5. After the desired changes are made, press
page display.
To remove overlaid data:
1. While on the Page display that shows the item or items you want to
remove, press
2. You'll see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
remove the data. To remove another item, select the item and press
|
ENT ENT.
3. When you have finished removing all the items you want from the
screen, press
EXIT
Overlay Data Shown, with bearing selected (left). Press ENT to access
R option (right). Press ENT again to remove item and return to
EMOVE
To move overlaid data:
You may find it useful to rearrange data floating in your display
window.
1. Press
MENU
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
3. The data begins to flash on your screen. Use any combination of
, ↑ and ↓ to move the data to a new location.
←
4. When satisfied, press
↓
| to
MENU O
VERLAY
to return to the page display.
the Overlay Data Shown screen.
|↓ to
O
VERLAY
EXIT
|
D ENT
ATA
| .
D ENT
ATA
|→ to
ENT
|
EXIT.
159
to check it (turn it on) or
ENT
|
EXIT EXIT
.
| .
M ENT
OVE
to return to the
|
ENT ENT
→
to
,