Map Detail Category Selection - Lowrance HD LCX-110C Operation Instructions Manual

Maps that are created using different datums will show the same
latitude/longitude in slightly different locations.
All datums are named. The GPS system is based on the WGS-84
datum, which covers the entire world. Other datums may also cover the
entire world, or just a small portion of it. By default, your unit uses the
WGS-84 datum. It, however, can show your position using one of 191
different datums. To change the datum:
1. Press
MENU
↓ ↑
2. Scroll or
To return to the last page displayed, press
3.
A list of the datums used by this unit is in the back of this manual.
GPS Setup Menu (left); Map Datum Menu (right).

Map Detail Category Selection

This menu determines which of the mapping features are shown on the
screen. This includes waypoints, trails, icons, cities, highways, etc. You
can select any of these items, customizing the map to your needs.
To get to Map Categories:
1. From the Map Page, press
↑ ↓
Press or
2.
a subcategory. Press
. To return to the last page displayed, press
3
↓
| | to
MENU GPS S
to select the desired datum, then press
to select a category or press → then press ↑ or ↓ to select
to turn it off (no check) or turn it on (checked.)
ENT
| |
ENT
ETUP
↓
| to
MENU M
AP
150
↓
to
D S
ATUM ELECTION
ENT.
|
EXIT EXIT.
C D
ATEGORIES RAWN
|
EXIT EXIT.
|
ENT.
|
ENT.