The other two methods provide a full range of navigation data and work
with both the Map Page and Navigation Page. The only difference
between them is "navigating a trail" follows a trail forward (from start
to end) while "backtracking" follows a trail in reverse.)
When hiking at walking speed with a hand-held GPS, we often use
visual back trailing because it is a bit better at following each little
turn on a footpath. At faster speeds, such as the highway or on the
water, the Navigate Trail and Backtrack Trail commands are handy.
Visual Trailing
1. On the Map Page, zoom (
2. Begin moving and watch the Map Page. Simply walk or steer so your
current position arrow traces along the trail you have just made.
Tip:
Generally, when using this method, the smaller the zoom range, the
more accurately you will be able to steer along the trail.
Navigate a Trail (forward)
The following figures illustrate the menu sequence for navigating a
trail.
1. Press
MENU
2. Press ↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
3. Press → to
4. Press ↓ to
asking if you want to be prompted or directed to intermediate waypoints
along the trail. Use → ← to make your selection, then press
After making your selection, the unit will begin to show navigation
information along the trail.
↓
|
|
to
MENU
M
.
ENT
|↓ to
D
T
ELETE
RAIL
|
N
ENT
AVIGATE
) so your flashing trail is visible.
ZIN or ZOUT
|
.
T
ENT
Y
RAILS
|
N
ENT
AVIGATE
. A navigation option window will appear
120
.
.
ENT