D Save Option Set Mode - Icom IC-7600 Instruction Manual

D Save option set mode

SAVE Contents
Selects the file save option from All or Select.
(default: All)
Memory & Settings
This setting is fixed "YES."
Voice TX Memory
Selects the voice TX message save option YES or
NO. (default: YES)
Voice RX Memory
Selects the voice RX message save option YES or
NO. (default: NO)
SAVE Form
Selects the file saving format between "Now Ver"
and "Old Ver." (default: Now Ver)
To save settings and memory contents for backup
or copying to another IC-7600, you must save the
data in the firmware version format that matches the
target IC-7600.
Select "Now Ver" for the current version, or "Old Ver
(xxx - xxx)" for the previous version.
• The previous versions are shown in brackets, and you
can select the desired version by rotating the main dial.
The file will be saved in the selected version.
See page 173 for confirming the
IC-7600.
firmware version of the
All
• All : Saves all the following contents.
• Select : Saves the selected contents only.
YES
• YES : Saves memory channel contents and
settings of set modes.
YES
• YES : Saves the voice TX message.
• NO : Does not save.
NO
• YES : Saves the voice RX message.
• NO : Does not save.
Now Ver
• Now Ver : Saves the file in the current firmware
version format.
• Old Ver : Saves the file in the firmware version
format shown in brackets.
NOTE:
• You cannot write setting file that is saved in the
current version format to an older firmware
version IC-7600.
• If the settings are saved in an older version
format, the items added in version 2.00 or later
are not saved.
10
SET MODE
148
10