Displaying A Saved Trail; Navigating Trails - Lowrance GlobalMap 540c BAJA Operation Instructions Manual

You can save and recall up to 10 different plot trails, which can be cop-
ied to your MMC for archiving or for transfer to your MapCreate soft-
ware.
Tip
:
Another quick way to stop recording one trail and begin a new one
is to use the New Trail command: Press
|
T ENT
RAILS
Caution:
You also have the option of completely turning off trail re-
cording, under the trail Options command. However, if the Up-
date Active Trail option is turned off, it will cancel the auto-
matic trail creation feature.

Displaying a Saved Trail

The active trail is automatically displayed on the map (the "Visible"
option) with the factory default settings. You can selectively turn trail
display off and on for any saved or active trail. In the Saved Trails List,
visible trails have a check mark in front of the trail name.
To turn off trail display:
1. Press
MENU
2. Press ↓ to enter the Saved Trail list, then use ↑ ↓ to select the de-
sired Trail Name|
3. Press ↓ to
press repeatedly.
EXIT
To turn on trail display:
1. Press
MENU
2. Press ↓ to enter the Saved Trail list, then use ↑ ↓ to select the de-
sired Trail Name|
3. Press ↓ to
press repeatedly.
EXIT

Navigating Trails

There are three methods for following a trail: visual trailing, navigat-
ing a trail (forward) and backtracking a trail (backward). Try each
method to see which you prefer.
Visual trailing is the simplest method. It uses only the Map Page and
requires no menu commands at all. The technique works the same if
| .
ENT
| |↓ to
MENU M
.
ENT
|→ to
A V
CTIVE
| |↓ to
MENU M
.
ENT
|→ to
A V
CTIVE
| .
T ENT
Y RAILS
| . To return to the previous page,
ENT
ISIBLE
| .
T ENT
Y RAILS
| . To return to the previous page,
ENT
ISIBLE
54
| |↓ to
MENU MENU M
Y