Lowrance GlobalMap 540c BAJA Operation Instructions Manual page 64

6. When you reach your destination, be sure to cancel your navigation:
press |
MENU MENU
sure; press ←|
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with
Navigate command highlighted for Trail 6. A trail is always converted
On the Map Page, the trail you are navigating is represented by a dot-
ted line that alternates with a flashing solid line. The Navigation Page
will also show the navigated trail as a dotted line. The bearing arrow
on the compass rose points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a trail way-
point, and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press
|↓ to
C
ANCEL
.
ENT
Figure 1.
Figure 3.
to a "route" when you navigate the trail.
|
N ENT
AVIGATION
Figure 2.
Figure 4.
EXIT
56
. The unit asks if you're
to clear the alarm.