Lowrance GlobalMap 540c BAJA Operation Instructions Manual page 67

Transfer My Data highlighted on System Setup menu (left). When
transferring data (right) you will have the option of transferring the
unit's data to a MMC card or loading the data on the MMC card into
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
|
S D ENT
AVE ATA
These figures (left to right) show the menu sequence for naming and
saving a GPS Data File from the unit's memory to an MMC.
The unit will display first a progress message followed by a completion
message when the data transfer is finished. To return to the Page view,
repeatedly press
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
lection box, use ↓ or ↑ to highlight the file, then press
selection. Next, press ↓ to
S D
AVE
.
.
EXIT
L
OAD
the unit.
| . If you want to rename the file (as
ENT
ATA
ENT
| .
D ENT
ATA
59
to activate the selection box.
to activate the se-
ENT
ENT
|↓ to
ENT
to accept the