Trails; Delete A Trail - Lowrance GlobalMap 540c BAJA Operation Instructions Manual

Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.37 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.

Trails

Delete a Trail

This is
Press |
MENU MENU
|
T ENT
LETE RAIL
Tip:
You can also delete all trails at once:
1. Press
MENU
2. Press → to
Figure 1.
Figure 3.
the command
|↓ to
M
Y
|← to |
Y ENT
ES
| |↓ to
MENU
D A
ELETE LL
used
| |↓ to trail name|
T ENT
RAILS
.
|
M T ENT
Y RAILS
| |← to
ENT Y
ES
69
Figure 2.
Figure 4.
to delete
.
| .
ENT
a trail:
|→ to
ENT D
E-