Display Indications - Yaesu FT-410 Operation Manual

d i
isplay
1
2
M-012
3
4 14.195.000
1. Information Display
: Indicates the RF attenuator status ("ON"
or "OFF") selected for operation by the
[ ATT] button.
: Indicates the Noise Blanker status ("ON"
or "OFF").
/ /
the currently selected operating mode.
: This indicator appears whenever the VOX
(automatic voice-actuated transmitter
switching) circuit is activated.
: This indicator appears whenever the
Clarifier function is activated.
Page 6
ndicaTiOns
M-012
14.195.000
5
6
/ / : Displays
Display
2. TX / RX Display
TX: This indicator appears during transmission.
RX: T h i s i n d i c a t o r a p p e a r s w h e n e v e r t h e
receiver squelch is open.
3. Indicates the operating band name, and
memory channel
When in VFO mode, the operating band name
(A or B) is displayed.While in memory mode, and
the memory channel number are displayed.
4. AF level indication
5. Meter
While receiving, the received signal strength is
displayed.
While transmitting, the meter displays PO,
ALC, or SWR (determined by the [ METER/DIM ]
button).
6. Frequency Display
The operating frequency is displayed.
FT-410 O M
peraTiOn anual