Resetting The Microprocessor; Menu Mode Reset; All Reset - Yaesu FT-410 Operation Manual

e O
asy peraTiOn
The FT-410 has two reset methods.
m m r
eNu ode eSet
Use this procedure to restore the Menu settings to
their factory defaults, without affecting the memories
you have programmed.
1. Press and hold in the [ Power / LOCK ] buttons
for one second to turn the transceiver off.
2. Press and hold the [ DISP ] and [ A=B ] button.
While holding it in, press and hold in the [ Power
/ LOCK ] button for one second to turn the
transceiver on. Once the transceiver comes on,
you may release the buttons.
A r
ll eSet
Use this procedure to restore all Menu and Memory
settings to their original factory defaults. All
Memories will be cleared by this procedure.
1. Press and hold in the [ Power / LOCK ] button for
one second to turn the transceiver off.
2. Press and hold the [ A/B ], [ M-CLR ] and [ SPLIT ]
buttons. While holding it in, press and hold in the
[ Power / LOCK ] button for one second to turn
the transceiver on. Once the transceiver comes
on, you may release the buttons.
Page 16
r m
eSettiNG the icroproceSSor
http://www.radioaficion.com/hamfiles/
[DISP] button
M-012
14.195.000
[Power / LOCK] button
[M-CLR] button
[SPLIT] button
M-012
14.195.000
[Power / LOCK] button
FT-410 O
peraTiOn
[A=B] button
[A/B] button
M
anual