Bulbs Removal - KYMCO MXU 500 Owner's Manual

Hide thumbs Also See for MXU 500:

Table of Contents

20. LIGHTS/SWITCHES

Headlight Connector

BULBS REMOVAL

Disconnect the headlight wire connector.

Remove the rubber boot from the headlight

Relax the lock clip to remove the bulb and

replace with a new one.

Install the bulb, aligning the bulb socket

groove with the bulb tab and set the lock

Connect headlight wire connector.

Install the rubber boot.

Install the front fender in the reverse order

POSITION LIGHT

Remove the bulb socket by pulling it out.

Remove the bulb.

Install the bulb in the reverse order of

Table of Contents