10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
LEFT CRANKCASE COVER
REMOVAL/INSTALLATION
REMOVAL
Remove the left footboard (refer to the
"FRAME COVERS" section in the chapter
2).
Remove the ten bolts, remove the left
crankcase cover and rubber gasket.
.
Remove the two dowel pins.
INSTALLATION
Install the rubber gasket onto the left
crankcase cover.
Install the two dowel pins onto the left
crankcase cover.
10-3
Left Front Cover
Dowel Pins
Dowel Pins
MXU 500
Bolts
Rubber Gasket