Dial Mode - Uniden WDECT 2300 Quick Start Manual

UP349BH (WDECT2300) ENG OM
• If you receive a call
or set up the Global
Setup menu, the
transfer will
be canceled.
• If an error occurs,
the phonebook
locations transferred
before the error were
stored in the
receiving handset.
Unavailable
appears on
the display.
• When the memory of
the receiving handset
Not
is full,
enough memory
in Receiving
Handset
appears.
You cannot transfer
the phonebook
location.
[ 18 ]
1/5/05 1:18 PM Page 18
Setting the Dial Mode (Australia only)
1) Enter the Global Setup menu, and then the Dial Mode
submenu (see "Entering the Menu" on page 13).
2) Press /vol/ or /vol/
select, Tone or Pulse (the initial setting is Tone).
3) Press . You will hear a confirmation tone.
Copy Phonebook
1) Enter the Global Setup menu, and then the Copy
Phonebook submenu (see "Entering the Menu" on
page 13).
2) Press /vol/ or /vol/
Memory or All Memory, and then press
If you choose All Memory, go to step 4.
3) Press /vol/ or /vol/
phonebook location you want to export, and then press
4) Press /vol/ or /vol/
phonebook locations, and then press
If you choose All Memory in the step 2, Are you sure? appears.
Press /vol/ or /vol/
The phonebook locations will be transferred to the handset. On the receiving handset,
Receiving and the handset name appear. When the transfer complete, Done!
appears on the handset.

Dial Mode

Tone
to change the
Pulse
Copy Phonebook
One Memory
All Memory :xxx
to choose One
.
, or the number keypad (0-9) to select the
.
to select the handset to which you want transfer the
.
to select Yes, and then press .