Using Two Way Communication Between The Handsets Anywhere Without The Base (Directlink); Room Monitor - Uniden WDECT 2300 Quick Start Manual

UP349BH (WDECT2300) ENG OM
HANDSETS ANYWHERE WITHOUT THE BASE (DIRECTLINK)
Two handsets can be
in Direct Link mode
while other handsets
are in use.
[ 42 ]
1/5/05 1:19 PM Page 42
USING TWO WAY COMMUNICATION BETWEEN THE
To use this feature, you must enter the two
handsets into the DirectLink mode first.
To enter the DirectLink mode
e e See page 13
DirectLink Call
1) When the phone is in the DirectLink standby mode,
press (example of DirectLink from
handset #1).
2) Select the handset to which you wish to DirectLink
with by pressing the number keys (1-4). Your handset
will then page the other handset.
3) On the receiving handset, press
Key Answer is on, press any number key,
or .
4) When you finish your conversation, press
either handset. Return the handset to the cradle, or
press /del, and then
normal standby mode (canceling DirectLink mode).

ROOM MONITOR

This feature allows you to monitor sounds in another room. To use this feature, place the
handset in the desired room to monitor (act an remote mic), and place the other near
listener (remote speaker). For instruction, see "Using the Room Monitor" on page 14.
SUN 12:00A
Handset #1
DirectLink Mode
To DirectLink
a handset
, or if Any
press [1-4]
,
DirectLink
on
<< Handset #1
to return to