Headlamp High/Low-Beam Changer; Flash-To-Pass; Windshield Wipers - Chevrolet HHR 2010 Owner's Manual

Hide thumbs Also See for HHR 2010:
Table of Contents

Advertisement

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high
beam, push the turn signal lever away from you.
To change the headlamps from high beam to low beam,
pull the turn signal lever toward you.

Flash-to-Pass

To signal to a driver in front of you that you want to
pass, pull the turn signal/multifunction lever until
the high-beam headlamps come on. Then release the
lever to turn them off.
This indicator light appears
on the instrument panel
cluster when the high
beams are on.

Windshield Wipers

The windshield wiper lever is on the right side of the
steering wheel.
Move the lever to one of the following positions:
1
(High Speed): Fast wipes.
6
(Low Speed): Slow wipes.
&
(Delay): Sets a delay between wipes.
4-5

Advertisement

Table of Contents
loading

Table of Contents