Diagnostic Modes; Entering Diagnostic Mode - Fisher & Paykel E522BLXU Service Manual

517804
6

DIAGNOSTIC MODES

6.1

Entering Diagnostic Mode

To enter diagnostic modes, press and hold the MENU button, then press the UP button for 4
seconds. The PC temperature will be displayed on the LCD as shown in Diagram A. The actual
temperature of the PC is shown.
NOTE: All temperatures shown on display are in degrees Celsius.
PC Sensor Temperature
Note: 4.0 shown on display, indicates the temperature of the PC sensor is 4.0
Diagram A
FC Sensor Temperature
Press the UP button once more – FC temperature.
Note: 12.0 min shown indicates the temperature of the FC sensor is –12
Diagram B
Defrost Sensor Temperature
Press the UP button once more – Defrost sensor temperature.
Note: 18.0 min shown indicates the temperature of the defrost sensor is -18
Diagram C
PC Sensor Temperature.
FC Sensor Temperature
Defrost Sensor Temperature
24
O O
C (39.2 F).
O O
C (10.4 F).
O O
C (0 F).