Samsung SCD-5083 User Manual page 30

camera operation
- MOTION : This product
DET. SIZE : Selects an object size to detect on the screen.

DET. AREA : Set the areas of

SEL AREA : Select from four
MODE : Determine whether to
SENSITIVITY : Set the
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
RETURN : Return to the MOTION DET menu.
NON DET. AREA : Specify a detection exception area to mask.Select a

SEL AREA : You can select up to 4 areas.
MODE : Determines whether to use the area selected in the AREA.
TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
RETURN : Return to the MOTION DET menu.
INDICATOR : If an object moves in a pattern set by the user, it will be

ALARM OUT : When object movement is detected, the detection signal will

EXTERNAL : Send signals through external terminals.
OSD : Display signals on the screen.
RETURN : Return to the MOTION DET menu.
RETURN : Return to the VIDEO ANALYTICS menu.

30_ camera operation
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
motion detection.
areas that users
want.
use the selected area.
sensitivity of
the motion
detection.
When you adjust the higher level, the more sensitive.
mask area number and specify the size and position.
displayed on the screen as a box.
be outputted.
MOTION DET
DET. SIZE
▶ 1.
DET. AREA
2.
NON DET. AREA
3.
4. INDICATOR
ALARM OUT
5.
RETURN
6.
MOTION DETECT AREA
SEL AREA
▶ 1.
MODE
2.
SENSITIVITY
3.
TOP
4.
BOTTOM
5.
LEFT
6.
RIGHT
7.
RETURN
8.
OFF
AREA
1
ON
5
---- ----

1
--------

-------- 100

-------- 1

100
--------
