ComPonEnT namEs anD funCTions
1
Dome Cover
1
rotate base : control rotating angle of camera.
3
Vari-focal lens module : 2.8 ~ 10.5mm (F1.2).
➍
function setup switch : Display the menu on the screen and move the cursor to four
5
Video output Terminal to monitor
6
Pan base : Control panning angle of camera.
7
Power input Connector
8
ground Terminal
9
D & n input Terminal : You can switch to Day & Night Mode by connecting an external
❿
mD output Terminal: Motion detection signals are output through this terminal.
⓫
Video output Jack : Video signals are output through this port. Connect this port to the
⓬
2
3
5
6
7
⓬
⓫
❿
9
8
directions to confirm status or after changing a selected item.
signal to this terminal.
Video IN port of a monitor.
➍
shield Case
2
English_11