Connecting The Rigging Frame To The Speaker; Connections Between Speakers - Toa SR-C8L Operating Instructions Manual

11.3. Connecting the Rigging Frame to the Speaker

Connect the rigging frame to the speaker referring to the following figure.
Correctly connect both units by tightening the supplied nuts and bolts from both the left and right sides.
When using the SR-C15B sub-woofer in the stack system, mount it in the lowermost position (i.e. immediately
above the rigging frame). In this configuration, attach the sub-woofer receptacle pieces to the rigging frame,
as shown in the figure.
Speaker system assembly

11.4. Connections Between Speakers

Refer to page 17; "Connection Between Speakers" of the chapter "Flying Systems Using the SR-RF8 Rigging
Frame."
Sub-woofer system assembly
Sub-woofer
receptacle piece
Sub-woofer
receptacle piece
25