Table of Contents
Advertisement
11. SPEAKER UNIT REPLACEMENT
Follow the procedures below to replace the speaker unit:
1. Remove all 17 screws (M5x40) holding the rear
cover in place, and detach the rear cover.
2. Detach the speaker cable from each speaker unit.
3. Remove all 4 screws holding each speaker unit in
place, and take out the speaker unit.
Speaker unit
M5x45 screw
4. Place the new unit in the mounting position. The
positioning block and concave facilitate unit
positioning.
5. Retighten the 4 speaker unit mounting screws.
6. Connect the speaker cables to the speaker unit.
7. Replace the rear cover, and retighten the 17
mounting screws.
M5x30 screw
M5x30 screw
Speaker unit
Rear view with the rear
cover removed
Note
In the above figure, only a
portion of the speaker unit
mounting screws are exposed.
However, all mounting screws
can be accessed through the
opening with a screwdriver.
New speaker unit
New speaker unit
11
Advertisement
Table of Contents
