Connection Between Speakers - Toa SR-C8L Operating Instructions Manual

9.4. Connection Between Speakers

Inter-connect speaker sections referring to the figures below.
Ensure that both speakers are securely connected by tightening the supplied nuts and bolts from both left and
right sides.
Since connection holes for setting the overlap angle are provided at the back of the speaker, assemble using
the connection holes matching the required overlap angle. The overlap angle can be set within the range of 0
to 5 degrees in 1 degree units.
Left side connection holes for
overlap angle settings
Left side connection
holes for overlap angle settings
Overlap angle
0degree 3degrees
1degree 4degrees
2degrees 5degrees
5degrees 2degrees
4degrees 1degree
3degrees 0degree
Front
Right side connection holes
for overlap angle settings
Right side connection
holes for overlap angle settings
17