Cable Connection To Input Connector - Toa F-122CU2 Instruction Manual

Toa electronics instruction manual ceiling speaker system f-122cu2

Table of Contents

7. CABLE CONNECTION TO INPUT CONNECTOR

Recommended cable types

• Solid copper wire:

• Stranded copper wire: 0.75 – 2.5 mm

Step 1. Loosen the 2 cover mounting screws, and rotate the

connector cover in the direction indicated by the

arrow in the figure at right.

Step 2. Detach the removable input connector from the

speaker's socket, and loosen the screw of the

terminal to be used.

Step 3. Insert the stripped cable end into the terminal and tighten the terminal screw with a screwdriver.

Note

If not making bridge connections,

be sure to tighten unused terminal

screws to avoid their vibration.

ø1.0 – ø1.6 mm

(equivalent to AWG 18 – 14)

[If not bridging]

Connector cover

From Amplifier

5 mm

(13/64")

Cover mounting screw

Speaker unit

Removable input

connector

Speaker unit

[If bridging]

To the

next speaker

Table of Contents