Alarm Activation; Operation During Timer Function - AOR AR-DV1 Operating Manual

1. Using the numeric keypad, enter the start time in MM-DD HH:MM format.
2. Press the [▼] key to move cursor download.
3. Using the numeric keypad, enter the end time in MM-DD HH:MM format.
4. Press the [▼] key to move cursor download.
5. Rotate the dial knob to select the day of the week.
6. Press the [PASS] key to select/deselect the day. When selected, the underscore will appear on the
bottom of the selected day.
7. Repeat above step as needed.
8. Press the [▼] key to go to next configuration menu.
SRC: Select signal source
VFO:
V-SR: VFO Search
SRCH: Program search --- Select search bank
MEMR: Memory channel --- Select memory bank, memory channel
SCAN: Memory scan --- Select memory bank. Priority channel available
ALARM VOL: Volume level (Default: 00)
(Available only when "ALARM" is selected on above configuration menu.)
(Volume level: zero (0) when "TIMER" is selected on above configuration menu.)
SQL OPEN: When set to "ON", squelch will force to open when alarm or timer activated.
When set to "OFF", squelch will operate according to the preset level.
(Default: OFF)

11-3-3 ALARM ACTIVATION

Once the alarm has been activated, "A" in reverse contrast will blink on the top middle of the LCD.
The AR-DV1 will switch on automatically (presuming the receiver had been switched off) on a daily basis
or weekly basis at the defined volume level and for the programmed length of time before automatically
switching off again until the same time on the following day. To cancel alarm function, press any key.

11-3-4 OPERATION DURING TIMER FUNCTION

While timer function is activated, all panel keys, squelch knob and dial knob will be disabled except the
[CLR] key.
VFO-A, VFO-B, VFO-Z (Default: VFO-A)
58