Receive Mode Selection; Digital Data Display - AOR AR-DV1 Operating Manual

Sdr digital voice receiver

Table of Contents

Alternatively, just long press the [MODE] key.

Note: Auto-mode is cancelled as soon as the receive mode is changed.

3-6-2 RECEIVE MODE SELECTION

Any receive mode may be selected at any frequency within the receiver's frequency coverage.

To access the receive mode menu, press the [MODE] key.

The following modes are available:

AUTO, FM, AM, SAH, SAL, USB, LSB, CW, DSTR, YAES, DMR, D-CR, dPMR, P-25, ALINC.

Rotate the dial knob to select the desired receive mode.

Press the [ENT] key to confirm selection.

Note that whichever mode is selected, the default IF filter bandwidth is applied.

When DIG.DECODE setting in the option menu (refer to: Section 10-4) is set to ON, data information for

the received signal will be displayed on the bottom of the LCD.

AUTO mode

AM mode

AUTO MODE

DMR mode

Table of Contents