Additional Settings; Agc (Automatic Gain Control); Attenuator - AOR AR-DV1 Operating Manual

Sdr digital voice receiver

Table of Contents

4 ADDITIONAL SETTINGS

AGC is available in the following AM modes: AM, SAH, SAL, USB, LSB and CW

To change the AGC parameter setting, press the [F] key and then the [5] key.

Select a new AGC parameter from the list of "AGCS (FAST)", "AGCM (MIDDLE)", "AGCS (SLOW)", by

rotating the dial knob.

To accept the new AGC parameter, press the [ENT] key.

Usually, FAST is used to receive CW, MEDIUM for AM and FM, and SLOW for SSB mode.

However, this option cannot be configured in FM mode.

When AGC is set to RF-G, the RF gain control can be adjusted by the squelch knob.

The attenuator reduces signal to the RF input stages of the AR-DV1. This helps prevent overloading due to

connection to an external antenna or when the receiver is used close to strong transmissions.

The AR-DV1 has the automatic attenuator function.

Table of Contents