Technical Data; Machine Installation; Preparation For Installation; Electrical Connection - ECM Classika II Service Manual

Caution!
Danger of injury: The following parts are hot or may become hot:
• area around the steam/ hot water handle
• steam/ hot water tube
• portafilter
• brew group
• body (upper part and side frames)

3.2 Technical data

Voltages:
Frequency:
Power:
Water tank:
Measurements:
Measurements with portafilter:
Weight:
4

MACHINE INSTALLATION

4.1 Preparation for installation

• Place the machine on an even, water-resistant and stable surface. You can regulate the height by
adjusting the feet of the machine.
• Never place the machine on hot surfaces.

4.2 Electrical connection

• Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
Instruction manual CLASSIKA II / CLASSIKA PID
EU: 230 V
UK: 230 V
New Zealand: 230 V
Australia: 230 V
US: 120 V
Japan: 100 V
EU: 50 Hz
UK: 50 Hz
New Zealand: 50 Hz
Australia: 50 Hz
US: 60 Hz
Japan: 50/ 60 Hz
1,200 W
approx. 2.8 litres
w x d x h / 250 mm x 447 mm x 393 mm
w x d x h / 250 mm x 555 mm x 393 mm
18.5 kg
21
ENGLISH