Printing A Configuration Page - Ricoh SP 210 Setup Manual

Printing a Configuration Page

Before you install the software, print the configuration page to check the network information.
SP 212Nw
Turn off the power.
While holding the [
[ ] key until 13 seconds elapse.
Check the IP address on the configuration page.
The address appears under Host Interface.
If the IPv4 address is not automatically assigned by the DHCP server, the machine automati-
cally selects an unused IPv4 address starting with "169.254.xxx.xxx" (Auto IP function).
SP 212SNw/SP 212SFNw
Press the [
Press the [ ] or [ ] key to select [Print List/Report], and then press the [OK] key.
] key down, switch the power on and do not release the
CTT175
] key.
DCT802
16